W21×111 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×111 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.5 in (546.1 mm) deep with a 12.3 in (312.4 mm) flange, a 0.55 in (14.0 mm) web and a 0.875 in (22.2 mm) flange, and weighs 111 lb/ft (165.2 kg/m). Area 32.6 in² (21,032 mm²); strong-axis Ix = 2,670 in⁴ (111,133.8 cm⁴), Sx = 249 in³ (4,080.4 cm³), Zx = 279 in³ (4,572 cm³).

dDepth
546.1 mm21.5 in21.5 in546.1 mm
bfFlange width
312.4 mm12.3 in12.3 in312.4 mm
twWeb thickness
14.0 mm0.55 in0.55 in14.0 mm
tfFlange thickness
22.2 mm0.875 in0.875 in22.2 mm

Drawing

312.4 mm12.3 in546.1 mm21.5 intf 22.2 mmtf 0.875 intw 14.0 mmtw 0.55 ink 35.1 mmk 1.38 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×111 specifications

dDepth21.5 in546.1 mm
bfFlange width12.3 in312.4 mm
twWeb thickness0.55 in14.0 mm
tfFlange thickness0.875 in22.2 mm
kDesign value1.38 in35.1 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 1/2 in38.1 mm
WWeight111 lb/ft165.2 kg/m
AArea32.6 in²21,032 mm²
IxMoment of inertia, strong axis2,670 in⁴111,133.8 cm⁴
ZxPlastic modulus, strong axis279 in³4,572 cm³
SxSection modulus, strong axis249 in³4,080.4 cm³
rxRadius of gyration, strong axis9.05 in229.9 mm
IyMoment of inertia, weak axis274 in⁴11,404.7 cm⁴
ZyPlastic modulus, weak axis68.2 in³1,117.6 cm³
SySection modulus, weak axis44.5 in³729.2 cm³
ryRadius of gyration, weak axis2.9 in73.7 mm
JTorsional constant6.83 in⁴284.29 cm⁴
bf/2tfFlange slenderness7.05
h/twWeb slenderness34.1
Metric designationW530×165

Also known as

W530×165

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.