W30×108 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×108 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 29.8 in (756.9 mm) deep with a 10.5 in (266.7 mm) flange, a 0.545 in (13.8 mm) web and a 0.76 in (19.3 mm) flange, and weighs 108 lb/ft (160.7 kg/m). Area 31.7 in² (20,452 mm²); strong-axis Ix = 4,470 in⁴ (186,055.4 cm⁴), Sx = 299 in³ (4,899.7 cm³), Zx = 346 in³ (5,669.9 cm³).

dDepth
756.9 mm29.8 in29.8 in756.9 mm
bfFlange width
266.7 mm10.5 in10.5 in266.7 mm
twWeb thickness
13.8 mm0.545 in0.545 in13.8 mm
tfFlange thickness
19.3 mm0.76 in0.76 in19.3 mm

Drawing

266.7 mm10.5 in756.9 mm29.8 intf 19.3 mmtf 0.76 intw 13.8 mmtw 0.545 ink 35.8 mmk 1.41 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×108 specifications

dDepth29.8 in756.9 mm
bfFlange width10.5 in266.7 mm
twWeb thickness0.545 in13.8 mm
tfFlange thickness0.76 in19.3 mm
kDesign value1.41 in35.8 mm
kDetailing value2 in50.8 mm
k1Detailing value1 1/2 in38.1 mm
WWeight108 lb/ft160.7 kg/m
AArea31.7 in²20,452 mm²
IxMoment of inertia, strong axis4,470 in⁴186,055.4 cm⁴
ZxPlastic modulus, strong axis346 in³5,669.9 cm³
SxSection modulus, strong axis299 in³4,899.7 cm³
rxRadius of gyration, strong axis11.9 in302.3 mm
IyMoment of inertia, weak axis146 in⁴6,077 cm⁴
ZyPlastic modulus, weak axis43.9 in³719.4 cm³
SySection modulus, weak axis27.9 in³457.2 cm³
ryRadius of gyration, weak axis2.15 in54.6 mm
JTorsional constant4.99 in⁴207.7 cm⁴
bf/2tfFlange slenderness6.89
h/twWeb slenderness49.6
Metric designationW760×161

Also known as

W760×161

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.