W14×109 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×109 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.3 in (363.2 mm) deep with a 14.6 in (370.8 mm) flange, a 0.525 in (13.3 mm) web and a 0.86 in (21.8 mm) flange, and weighs 109 lb/ft (162.2 kg/m). Area 32 in² (20,645 mm²); strong-axis Ix = 1,240 in⁴ (51,612.7 cm⁴), Sx = 173 in³ (2,835 cm³), Zx = 192 in³ (3,146.3 cm³).

dDepth
363.2 mm14.3 in14.3 in363.2 mm
bfFlange width
370.8 mm14.6 in14.6 in370.8 mm
twWeb thickness
13.3 mm0.525 in0.525 in13.3 mm
tfFlange thickness
21.8 mm0.86 in0.86 in21.8 mm

Drawing

370.8 mm14.6 in363.2 mm14.3 intf 21.8 mmtf 0.86 intw 13.3 mmtw 0.525 ink 37.1 mmk 1.46 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×109 specifications

dDepth14.3 in363.2 mm
bfFlange width14.6 in370.8 mm
twWeb thickness0.525 in13.3 mm
tfFlange thickness0.86 in21.8 mm
kDesign value1.46 in37.1 mm
kDetailing value2 3/16 in55.6 mm
k1Detailing value1 1/2 in38.1 mm
WWeight109 lb/ft162.2 kg/m
AArea32 in²20,645 mm²
IxMoment of inertia, strong axis1,240 in⁴51,612.7 cm⁴
ZxPlastic modulus, strong axis192 in³3,146.3 cm³
SxSection modulus, strong axis173 in³2,835 cm³
rxRadius of gyration, strong axis6.22 in158.0 mm
IyMoment of inertia, weak axis447 in⁴18,605.5 cm⁴
ZyPlastic modulus, weak axis92.7 in³1,519.1 cm³
SySection modulus, weak axis61.2 in³1,002.9 cm³
ryRadius of gyration, weak axis3.73 in94.7 mm
JTorsional constant7.12 in⁴296.36 cm⁴
bf/2tfFlange slenderness8.49
h/twWeb slenderness21.7
Metric designationW360×162

Also known as

W360×162

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.