W14×159 Beam Dimensions & Properties
W Shapes (AISC) · W14: 14 in nominal depth
W14×159 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 15 in (381.0 mm) deep with a 15.6 in (396.2 mm) flange, a 0.745 in (18.9 mm) web and a 1.19 in (30.2 mm) flange, and weighs 159 lb/ft (236.6 kg/m). Area 46.7 in² (30,129 mm²); strong-axis Ix = 1,900 in⁴ (79,084 cm⁴), Sx = 254 in³ (4,162.3 cm³), Zx = 287 in³ (4,703.1 cm³).
- dDepth
- 381.0 mm15 in15 in381.0 mm
- bfFlange width
- 396.2 mm15.6 in15.6 in396.2 mm
- twWeb thickness
- 18.9 mm0.745 in0.745 in18.9 mm
- tfFlange thickness
- 30.2 mm1.19 in1.19 in30.2 mm
Drawing
W14×159 specifications
| dDepth | 15 in381.0 mm |
|---|---|
| bfFlange width | 15.6 in396.2 mm |
| twWeb thickness | 0.745 in18.9 mm |
| tfFlange thickness | 1.19 in30.2 mm |
| kDesign value | 1.79 in45.5 mm |
| kDetailing value | 2 1/2 in63.5 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 159 lb/ft236.6 kg/m |
| AArea | 46.7 in²30,129 mm² |
| IxMoment of inertia, strong axis | 1,900 in⁴79,084 cm⁴ |
| ZxPlastic modulus, strong axis | 287 in³4,703.1 cm³ |
| SxSection modulus, strong axis | 254 in³4,162.3 cm³ |
| rxRadius of gyration, strong axis | 6.38 in162.1 mm |
| IyMoment of inertia, weak axis | 748 in⁴31,134.1 cm⁴ |
| ZyPlastic modulus, weak axis | 146 in³2,392.5 cm³ |
| SySection modulus, weak axis | 96.2 in³1,576.4 cm³ |
| ryRadius of gyration, weak axis | 4 in101.6 mm |
| JTorsional constant | 19.7 in⁴819.98 cm⁴ |
| bf/2tfFlange slenderness | 6.54 |
| h/twWeb slenderness | 15.3 |
| Metric designation | W360×237 |
Also known as
W360×237
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.