W14×176 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×176 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 15.2 in (386.1 mm) deep with a 15.7 in (398.8 mm) flange, a 0.83 in (21.1 mm) web and a 1.31 in (33.3 mm) flange, and weighs 176 lb/ft (261.9 kg/m). Area 51.8 in² (33,419 mm²); strong-axis Ix = 2,140 in⁴ (89,073.5 cm⁴), Sx = 281 in³ (4,604.8 cm³), Zx = 320 in³ (5,243.9 cm³).

dDepth
386.1 mm15.2 in15.2 in386.1 mm
bfFlange width
398.8 mm15.7 in15.7 in398.8 mm
twWeb thickness
21.1 mm0.83 in0.83 in21.1 mm
tfFlange thickness
33.3 mm1.31 in1.31 in33.3 mm

Drawing

398.8 mm15.7 in386.1 mm15.2 intf 33.3 mmtf 1.31 intw 21.1 mmtw 0.83 ink 48.5 mmk 1.91 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×176 specifications

dDepth15.2 in386.1 mm
bfFlange width15.7 in398.8 mm
twWeb thickness0.83 in21.1 mm
tfFlange thickness1.31 in33.3 mm
kDesign value1.91 in48.5 mm
kDetailing value2 5/8 in66.7 mm
k1Detailing value1 5/8 in41.3 mm
WWeight176 lb/ft261.9 kg/m
AArea51.8 in²33,419 mm²
IxMoment of inertia, strong axis2,140 in⁴89,073.5 cm⁴
ZxPlastic modulus, strong axis320 in³5,243.9 cm³
SxSection modulus, strong axis281 in³4,604.8 cm³
rxRadius of gyration, strong axis6.43 in163.3 mm
IyMoment of inertia, weak axis838 in⁴34,880.2 cm⁴
ZyPlastic modulus, weak axis163 in³2,671.1 cm³
SySection modulus, weak axis107 in³1,753.4 cm³
ryRadius of gyration, weak axis4.02 in102.1 mm
JTorsional constant26.5 in⁴1,103.01 cm⁴
bf/2tfFlange slenderness5.97
h/twWeb slenderness13.7
Metric designationW360×262

Also known as

W360×262

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.