W24×162 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×162 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 25 in (635.0 mm) deep with a 13 in (330.2 mm) flange, a 0.705 in (17.9 mm) web and a 1.22 in (31.0 mm) flange, and weighs 162 lb/ft (241.1 kg/m). Area 47.8 in² (30,839 mm²); strong-axis Ix = 5,170 in⁴ (215,191.6 cm⁴), Sx = 414 in³ (6,784.2 cm³), Zx = 468 in³ (7,669.1 cm³).

dDepth
635.0 mm25 in25 in635.0 mm
bfFlange width
330.2 mm13 in13 in330.2 mm
twWeb thickness
17.9 mm0.705 in0.705 in17.9 mm
tfFlange thickness
31.0 mm1.22 in1.22 in31.0 mm

Drawing

330.2 mm13 in635.0 mm25 intf 31.0 mmtf 1.22 intw 17.9 mmtw 0.705 ink 43.7 mmk 1.72 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×162 specifications

dDepth25 in635.0 mm
bfFlange width13 in330.2 mm
twWeb thickness0.705 in17.9 mm
tfFlange thickness1.22 in31.0 mm
kDesign value1.72 in43.7 mm
kDetailing value2 1/2 in63.5 mm
k1Detailing value1 9/16 in39.7 mm
WWeight162 lb/ft241.1 kg/m
AArea47.8 in²30,839 mm²
IxMoment of inertia, strong axis5,170 in⁴215,191.6 cm⁴
ZxPlastic modulus, strong axis468 in³7,669.1 cm³
SxSection modulus, strong axis414 in³6,784.2 cm³
rxRadius of gyration, strong axis10.4 in264.2 mm
IyMoment of inertia, weak axis443 in⁴18,439.1 cm⁴
ZyPlastic modulus, weak axis105 in³1,720.6 cm³
SySection modulus, weak axis68.4 in³1,120.9 cm³
ryRadius of gyration, weak axis3.05 in77.5 mm
JTorsional constant18.5 in⁴770.03 cm⁴
bf/2tfFlange slenderness5.31
h/twWeb slenderness30.6
Metric designationW610×241

Also known as

W610×241

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.