W36×160 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×160 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 36 in (914.4 mm) deep with a 12 in (304.8 mm) flange, a 0.65 in (16.5 mm) web and a 1.02 in (25.9 mm) flange, and weighs 160 lb/ft (238.1 kg/m). Area 47 in² (30,323 mm²); strong-axis Ix = 9,760 in⁴ (406,241.9 cm⁴), Sx = 542 in³ (8,881.8 cm³), Zx = 624 in³ (10,225.5 cm³).
- dDepth
- 914.4 mm36 in36 in914.4 mm
- bfFlange width
- 304.8 mm12 in12 in304.8 mm
- twWeb thickness
- 16.5 mm0.65 in0.65 in16.5 mm
- tfFlange thickness
- 25.9 mm1.02 in1.02 in25.9 mm
Drawing
W36×160 specifications
| dDepth | 36 in914.4 mm |
|---|---|
| bfFlange width | 12 in304.8 mm |
| twWeb thickness | 0.65 in16.5 mm |
| tfFlange thickness | 1.02 in25.9 mm |
| kDesign value | 1.77 in45.0 mm |
| kDetailing value | 2 1/4 in57.2 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 160 lb/ft238.1 kg/m |
| AArea | 47 in²30,323 mm² |
| IxMoment of inertia, strong axis | 9,760 in⁴406,241.9 cm⁴ |
| ZxPlastic modulus, strong axis | 624 in³10,225.5 cm³ |
| SxSection modulus, strong axis | 542 in³8,881.8 cm³ |
| rxRadius of gyration, strong axis | 14.4 in365.8 mm |
| IyMoment of inertia, weak axis | 295 in⁴12,278.8 cm⁴ |
| ZyPlastic modulus, weak axis | 77.3 in³1,266.7 cm³ |
| SySection modulus, weak axis | 49.1 in³804.6 cm³ |
| ryRadius of gyration, weak axis | 2.5 in63.5 mm |
| JTorsional constant | 12.4 in⁴516.13 cm⁴ |
| bf/2tfFlange slenderness | 5.88 |
| h/twWeb slenderness | 49.9 |
| Metric designation | W920×238 |
Also known as
W920×238
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.