W18×158 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×158 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 19.7 in (500.4 mm) deep with a 11.3 in (287.0 mm) flange, a 0.81 in (20.6 mm) web and a 1.44 in (36.6 mm) flange, and weighs 158 lb/ft (235.1 kg/m). Area 46.3 in² (29,871 mm²); strong-axis Ix = 3,060 in⁴ (127,366.8 cm⁴), Sx = 310 in³ (5,080 cm³), Zx = 356 in³ (5,833.8 cm³).

dDepth
500.4 mm19.7 in19.7 in500.4 mm
bfFlange width
287.0 mm11.3 in11.3 in287.0 mm
twWeb thickness
20.6 mm0.81 in0.81 in20.6 mm
tfFlange thickness
36.6 mm1.44 in1.44 in36.6 mm

Drawing

287.0 mm11.3 in500.4 mm19.7 intf 36.6 mmtf 1.44 intw 20.6 mmtw 0.81 ink 46.7 mmk 1.84 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×158 specifications

dDepth19.7 in500.4 mm
bfFlange width11.3 in287.0 mm
twWeb thickness0.81 in20.6 mm
tfFlange thickness1.44 in36.6 mm
kDesign value1.84 in46.7 mm
kDetailing value2 3/8 in60.3 mm
k1Detailing value1 1/4 in31.8 mm
WWeight158 lb/ft235.1 kg/m
AArea46.3 in²29,871 mm²
IxMoment of inertia, strong axis3,060 in⁴127,366.8 cm⁴
ZxPlastic modulus, strong axis356 in³5,833.8 cm³
SxSection modulus, strong axis310 in³5,080 cm³
rxRadius of gyration, strong axis8.12 in206.2 mm
IyMoment of inertia, weak axis347 in⁴14,443.2 cm⁴
ZyPlastic modulus, weak axis94.8 in³1,553.5 cm³
SySection modulus, weak axis61.4 in³1,006.2 cm³
ryRadius of gyration, weak axis2.74 in69.6 mm
JTorsional constant25.2 in⁴1,048.9 cm⁴
bf/2tfFlange slenderness3.92
h/twWeb slenderness19.8
Metric designationW460×235

Also known as

W460×235

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.