W27×161 Beam Dimensions & Properties
W Shapes (AISC) · W27: 27 in nominal depth
W27×161 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 27.6 in (701.0 mm) deep with a 14 in (355.6 mm) flange, a 0.66 in (16.8 mm) web and a 1.08 in (27.4 mm) flange, and weighs 161 lb/ft (239.6 kg/m). Area 47.6 in² (30,710 mm²); strong-axis Ix = 6,310 in⁴ (262,642 cm⁴), Sx = 458 in³ (7,505.3 cm³), Zx = 515 in³ (8,439.3 cm³).
- dDepth
- 701.0 mm27.6 in27.6 in701.0 mm
- bfFlange width
- 355.6 mm14 in14 in355.6 mm
- twWeb thickness
- 16.8 mm0.66 in0.66 in16.8 mm
- tfFlange thickness
- 27.4 mm1.08 in1.08 in27.4 mm
Drawing
W27×161 specifications
| dDepth | 27.6 in701.0 mm |
|---|---|
| bfFlange width | 14 in355.6 mm |
| twWeb thickness | 0.66 in16.8 mm |
| tfFlange thickness | 1.08 in27.4 mm |
| kDesign value | 1.87 in47.5 mm |
| kDetailing value | 2 5/16 in58.7 mm |
| k1Detailing value | 1 9/16 in39.7 mm |
| WWeight | 161 lb/ft239.6 kg/m |
| AArea | 47.6 in²30,710 mm² |
| IxMoment of inertia, strong axis | 6,310 in⁴262,642 cm⁴ |
| ZxPlastic modulus, strong axis | 515 in³8,439.3 cm³ |
| SxSection modulus, strong axis | 458 in³7,505.3 cm³ |
| rxRadius of gyration, strong axis | 11.5 in292.1 mm |
| IyMoment of inertia, weak axis | 497 in⁴20,686.7 cm⁴ |
| ZyPlastic modulus, weak axis | 109 in³1,786.2 cm³ |
| SySection modulus, weak axis | 70.9 in³1,161.8 cm³ |
| ryRadius of gyration, weak axis | 3.23 in82.0 mm |
| JTorsional constant | 15.1 in⁴628.51 cm⁴ |
| bf/2tfFlange slenderness | 6.49 |
| h/twWeb slenderness | 36.1 |
| Metric designation | W690×240 |
Also known as
W690×240
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.