W14×145 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×145 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14.8 in (375.9 mm) deep with a 15.5 in (393.7 mm) flange, a 0.68 in (17.3 mm) web and a 1.09 in (27.7 mm) flange, and weighs 145 lb/ft (215.8 kg/m). Area 42.7 in² (27,548 mm²); strong-axis Ix = 1,710 in⁴ (71,175.6 cm⁴), Sx = 232 in³ (3,801.8 cm³), Zx = 260 in³ (4,260.6 cm³).

dDepth
375.9 mm14.8 in14.8 in375.9 mm
bfFlange width
393.7 mm15.5 in15.5 in393.7 mm
twWeb thickness
17.3 mm0.68 in0.68 in17.3 mm
tfFlange thickness
27.7 mm1.09 in1.09 in27.7 mm

Drawing

393.7 mm15.5 in375.9 mm14.8 intf 27.7 mmtf 1.09 intw 17.3 mmtw 0.68 ink 42.9 mmk 1.69 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×145 specifications

dDepth14.8 in375.9 mm
bfFlange width15.5 in393.7 mm
twWeb thickness0.68 in17.3 mm
tfFlange thickness1.09 in27.7 mm
kDesign value1.69 in42.9 mm
kDetailing value2 3/8 in60.3 mm
k1Detailing value1 9/16 in39.7 mm
WWeight145 lb/ft215.8 kg/m
AArea42.7 in²27,548 mm²
IxMoment of inertia, strong axis1,710 in⁴71,175.6 cm⁴
ZxPlastic modulus, strong axis260 in³4,260.6 cm³
SxSection modulus, strong axis232 in³3,801.8 cm³
rxRadius of gyration, strong axis6.33 in160.8 mm
IyMoment of inertia, weak axis677 in⁴28,178.9 cm⁴
ZyPlastic modulus, weak axis133 in³2,179.5 cm³
SySection modulus, weak axis87.3 in³1,430.6 cm³
ryRadius of gyration, weak axis3.98 in101.1 mm
JTorsional constant15.2 in⁴632.67 cm⁴
bf/2tfFlange slenderness7.11
h/twWeb slenderness16.8
Metric designationW360×216

Also known as

W360×216

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.