W14×30 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×30 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.8 in (350.5 mm) deep with a 6.73 in (170.9 mm) flange, a 0.27 in (6.9 mm) web and a 0.385 in (9.8 mm) flange, and weighs 30 lb/ft (44.6 kg/m). Area 8.85 in² (5,710 mm²); strong-axis Ix = 291 in⁴ (12,112.3 cm⁴), Sx = 42 in³ (688.3 cm³), Zx = 47.3 in³ (775.1 cm³).

dDepth
350.5 mm13.8 in13.8 in350.5 mm
bfFlange width
170.9 mm6.73 in6.73 in170.9 mm
twWeb thickness
6.9 mm0.27 in0.27 in6.9 mm
tfFlange thickness
9.8 mm0.385 in0.385 in9.8 mm

Drawing

170.9 mm6.73 in350.5 mm13.8 intf 9.8 mmtf 0.385 intw 6.9 mmtw 0.27 ink 19.9 mmk 0.785 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×30 specifications

dDepth13.8 in350.5 mm
bfFlange width6.73 in170.9 mm
twWeb thickness0.27 in6.9 mm
tfFlange thickness0.385 in9.8 mm
kDesign value0.785 in19.9 mm
kDetailing value1 1/8 in28.6 mm
k1Detailing value3/4 in19.0 mm
WWeight30 lb/ft44.6 kg/m
AArea8.85 in²5,710 mm²
IxMoment of inertia, strong axis291 in⁴12,112.3 cm⁴
ZxPlastic modulus, strong axis47.3 in³775.1 cm³
SxSection modulus, strong axis42 in³688.3 cm³
rxRadius of gyration, strong axis5.73 in145.5 mm
IyMoment of inertia, weak axis19.6 in⁴815.8 cm⁴
ZyPlastic modulus, weak axis8.99 in³147.3 cm³
SySection modulus, weak axis5.82 in³95.4 cm³
ryRadius of gyration, weak axis1.49 in37.8 mm
JTorsional constant0.38 in⁴15.82 cm⁴
bf/2tfFlange slenderness8.74
h/twWeb slenderness45.4
Metric designationW360×44

Also known as

W360×44

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.