W14×61 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×61 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 13.9 in (353.1 mm) deep with a 10 in (254.0 mm) flange, a 0.375 in (9.5 mm) web and a 0.645 in (16.4 mm) flange, and weighs 61 lb/ft (90.8 kg/m). Area 17.9 in² (11,548 mm²); strong-axis Ix = 640 in⁴ (26,638.8 cm⁴), Sx = 92.1 in³ (1,509.2 cm³), Zx = 102 in³ (1,671.5 cm³).

dDepth
353.1 mm13.9 in13.9 in353.1 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
9.5 mm0.375 in0.375 in9.5 mm
tfFlange thickness
16.4 mm0.645 in0.645 in16.4 mm

Drawing

254.0 mm10 in353.1 mm13.9 intf 16.4 mmtf 0.645 intw 9.5 mmtw 0.375 ink 31.5 mmk 1.24 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×61 specifications

dDepth13.9 in353.1 mm
bfFlange width10 in254.0 mm
twWeb thickness0.375 in9.5 mm
tfFlange thickness0.645 in16.4 mm
kDesign value1.24 in31.5 mm
kDetailing value1 1/2 in38.1 mm
k1Detailing value1 in25.4 mm
WWeight61 lb/ft90.8 kg/m
AArea17.9 in²11,548 mm²
IxMoment of inertia, strong axis640 in⁴26,638.8 cm⁴
ZxPlastic modulus, strong axis102 in³1,671.5 cm³
SxSection modulus, strong axis92.1 in³1,509.2 cm³
rxRadius of gyration, strong axis5.98 in151.9 mm
IyMoment of inertia, weak axis107 in⁴4,453.7 cm⁴
ZyPlastic modulus, weak axis32.8 in³537.5 cm³
SySection modulus, weak axis21.5 in³352.3 cm³
ryRadius of gyration, weak axis2.45 in62.2 mm
JTorsional constant2.19 in⁴91.15 cm⁴
bf/2tfFlange slenderness7.75
h/twWeb slenderness30.4
Metric designationW360×91

Also known as

W360×91

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.