W14×68 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×68 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14 in (355.6 mm) deep with a 10 in (254.0 mm) flange, a 0.415 in (10.5 mm) web and a 0.72 in (18.3 mm) flange, and weighs 68 lb/ft (101.2 kg/m). Area 20 in² (12,903 mm²); strong-axis Ix = 722 in⁴ (30,051.9 cm⁴), Sx = 103 in³ (1,687.9 cm³), Zx = 115 in³ (1,884.5 cm³).

dDepth
355.6 mm14 in14 in355.6 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
10.5 mm0.415 in0.415 in10.5 mm
tfFlange thickness
18.3 mm0.72 in0.72 in18.3 mm

Drawing

254.0 mm10 in355.6 mm14 intf 18.3 mmtf 0.72 intw 10.5 mmtw 0.415 ink 33.3 mmk 1.31 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×68 specifications

dDepth14 in355.6 mm
bfFlange width10 in254.0 mm
twWeb thickness0.415 in10.5 mm
tfFlange thickness0.72 in18.3 mm
kDesign value1.31 in33.3 mm
kDetailing value1 9/16 in39.7 mm
k1Detailing value1 1/16 in27.0 mm
WWeight68 lb/ft101.2 kg/m
AArea20 in²12,903 mm²
IxMoment of inertia, strong axis722 in⁴30,051.9 cm⁴
ZxPlastic modulus, strong axis115 in³1,884.5 cm³
SxSection modulus, strong axis103 in³1,687.9 cm³
rxRadius of gyration, strong axis6.01 in152.7 mm
IyMoment of inertia, weak axis121 in⁴5,036.4 cm⁴
ZyPlastic modulus, weak axis36.9 in³604.7 cm³
SySection modulus, weak axis24.2 in³396.6 cm³
ryRadius of gyration, weak axis2.46 in62.5 mm
JTorsional constant3.01 in⁴125.29 cm⁴
bf/2tfFlange slenderness6.97
h/twWeb slenderness27.5
Metric designationW360×101

Also known as

W360×101

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.