W21×62 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×62 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21 in (533.4 mm) deep with a 8.24 in (209.3 mm) flange, a 0.4 in (10.2 mm) web and a 0.615 in (15.6 mm) flange, and weighs 62 lb/ft (92.3 kg/m). Area 18.3 in² (11,806 mm²); strong-axis Ix = 1,330 in⁴ (55,358.8 cm⁴), Sx = 127 in³ (2,081.2 cm³), Zx = 144 in³ (2,359.7 cm³).
- dDepth
- 533.4 mm21 in21 in533.4 mm
- bfFlange width
- 209.3 mm8.24 in8.24 in209.3 mm
- twWeb thickness
- 10.2 mm0.4 in0.4 in10.2 mm
- tfFlange thickness
- 15.6 mm0.615 in0.615 in15.6 mm
Drawing
W21×62 specifications
| dDepth | 21 in533.4 mm |
|---|---|
| bfFlange width | 8.24 in209.3 mm |
| twWeb thickness | 0.4 in10.2 mm |
| tfFlange thickness | 0.615 in15.6 mm |
| kDesign value | 1.12 in28.4 mm |
| kDetailing value | 1 5/16 in33.3 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 62 lb/ft92.3 kg/m |
| AArea | 18.3 in²11,806 mm² |
| IxMoment of inertia, strong axis | 1,330 in⁴55,358.8 cm⁴ |
| ZxPlastic modulus, strong axis | 144 in³2,359.7 cm³ |
| SxSection modulus, strong axis | 127 in³2,081.2 cm³ |
| rxRadius of gyration, strong axis | 8.54 in216.9 mm |
| IyMoment of inertia, weak axis | 57.5 in⁴2,393.3 cm⁴ |
| ZyPlastic modulus, weak axis | 21.7 in³355.6 cm³ |
| SySection modulus, weak axis | 14 in³229.4 cm³ |
| ryRadius of gyration, weak axis | 1.77 in45.0 mm |
| JTorsional constant | 1.83 in⁴76.17 cm⁴ |
| bf/2tfFlange slenderness | 6.7 |
| h/twWeb slenderness | 46.9 |
| Metric designation | W530×92 |
Also known as
W530×92
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.