W24×62 Beam Dimensions & Properties
W Shapes (AISC) · W24: 24 in nominal depth
W24×62 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 23.7 in (602.0 mm) deep with a 7.04 in (178.8 mm) flange, a 0.43 in (10.9 mm) web and a 0.59 in (15.0 mm) flange, and weighs 62 lb/ft (92.3 kg/m). Area 18.2 in² (11,742 mm²); strong-axis Ix = 1,550 in⁴ (64,515.9 cm⁴), Sx = 131 in³ (2,146.7 cm³), Zx = 153 in³ (2,507.2 cm³).
- dDepth
- 602.0 mm23.7 in23.7 in602.0 mm
- bfFlange width
- 178.8 mm7.04 in7.04 in178.8 mm
- twWeb thickness
- 10.9 mm0.43 in0.43 in10.9 mm
- tfFlange thickness
- 15.0 mm0.59 in0.59 in15.0 mm
Drawing
W24×62 specifications
| dDepth | 23.7 in602.0 mm |
|---|---|
| bfFlange width | 7.04 in178.8 mm |
| twWeb thickness | 0.43 in10.9 mm |
| tfFlange thickness | 0.59 in15.0 mm |
| kDesign value | 1.09 in27.7 mm |
| kDetailing value | 1 1/2 in38.1 mm |
| k1Detailing value | 1 1/16 in27.0 mm |
| WWeight | 62 lb/ft92.3 kg/m |
| AArea | 18.2 in²11,742 mm² |
| IxMoment of inertia, strong axis | 1,550 in⁴64,515.9 cm⁴ |
| ZxPlastic modulus, strong axis | 153 in³2,507.2 cm³ |
| SxSection modulus, strong axis | 131 in³2,146.7 cm³ |
| rxRadius of gyration, strong axis | 9.23 in234.4 mm |
| IyMoment of inertia, weak axis | 34.5 in⁴1,436 cm⁴ |
| ZyPlastic modulus, weak axis | 15.7 in³257.3 cm³ |
| SySection modulus, weak axis | 9.8 in³160.6 cm³ |
| ryRadius of gyration, weak axis | 1.38 in35.1 mm |
| JTorsional constant | 1.71 in⁴71.18 cm⁴ |
| bf/2tfFlange slenderness | 5.97 |
| h/twWeb slenderness | 50.1 |
| Metric designation | W610×92 |
Also known as
W610×92
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.