W10×60 Beam Dimensions & Properties
W Shapes (AISC) · W10: 10 in nominal depth
W10×60 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.2 in (259.1 mm) deep with a 10.1 in (256.5 mm) flange, a 0.42 in (10.7 mm) web and a 0.68 in (17.3 mm) flange, and weighs 60 lb/ft (89.3 kg/m). Area 17.7 in² (11,419 mm²); strong-axis Ix = 341 in⁴ (14,193.5 cm⁴), Sx = 66.7 in³ (1,093 cm³), Zx = 74.6 in³ (1,222.5 cm³).
- dDepth
- 259.1 mm10.2 in10.2 in259.1 mm
- bfFlange width
- 256.5 mm10.1 in10.1 in256.5 mm
- twWeb thickness
- 10.7 mm0.42 in0.42 in10.7 mm
- tfFlange thickness
- 17.3 mm0.68 in0.68 in17.3 mm
Drawing
W10×60 specifications
| dDepth | 10.2 in259.1 mm |
|---|---|
| bfFlange width | 10.1 in256.5 mm |
| twWeb thickness | 0.42 in10.7 mm |
| tfFlange thickness | 0.68 in17.3 mm |
| kDesign value | 1.18 in30.0 mm |
| kDetailing value | 1 3/8 in34.9 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 60 lb/ft89.3 kg/m |
| AArea | 17.7 in²11,419 mm² |
| IxMoment of inertia, strong axis | 341 in⁴14,193.5 cm⁴ |
| ZxPlastic modulus, strong axis | 74.6 in³1,222.5 cm³ |
| SxSection modulus, strong axis | 66.7 in³1,093 cm³ |
| rxRadius of gyration, strong axis | 4.39 in111.5 mm |
| IyMoment of inertia, weak axis | 116 in⁴4,828.3 cm⁴ |
| ZyPlastic modulus, weak axis | 35 in³573.5 cm³ |
| SySection modulus, weak axis | 23 in³376.9 cm³ |
| ryRadius of gyration, weak axis | 2.57 in65.3 mm |
| JTorsional constant | 2.48 in⁴103.23 cm⁴ |
| bf/2tfFlange slenderness | 7.41 |
| h/twWeb slenderness | 18.7 |
| Metric designation | W250×89 |
Also known as
W250×89
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.