W24×76 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×76 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 23.9 in (607.1 mm) deep with a 8.99 in (228.3 mm) flange, a 0.44 in (11.2 mm) web and a 0.68 in (17.3 mm) flange, and weighs 76 lb/ft (113.1 kg/m). Area 22.4 in² (14,452 mm²); strong-axis Ix = 2,100 in⁴ (87,408.6 cm⁴), Sx = 176 in³ (2,884.1 cm³), Zx = 200 in³ (3,277.4 cm³).

dDepth
607.1 mm23.9 in23.9 in607.1 mm
bfFlange width
228.3 mm8.99 in8.99 in228.3 mm
twWeb thickness
11.2 mm0.44 in0.44 in11.2 mm
tfFlange thickness
17.3 mm0.68 in0.68 in17.3 mm

Drawing

228.3 mm8.99 in607.1 mm23.9 intf 17.3 mmtf 0.68 intw 11.2 mmtw 0.44 ink 30.0 mmk 1.18 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×76 specifications

dDepth23.9 in607.1 mm
bfFlange width8.99 in228.3 mm
twWeb thickness0.44 in11.2 mm
tfFlange thickness0.68 in17.3 mm
kDesign value1.18 in30.0 mm
kDetailing value1 15/16 in49.2 mm
k1Detailing value1 7/16 in36.5 mm
WWeight76 lb/ft113.1 kg/m
AArea22.4 in²14,452 mm²
IxMoment of inertia, strong axis2,100 in⁴87,408.6 cm⁴
ZxPlastic modulus, strong axis200 in³3,277.4 cm³
SxSection modulus, strong axis176 in³2,884.1 cm³
rxRadius of gyration, strong axis9.69 in246.1 mm
IyMoment of inertia, weak axis82.5 in⁴3,433.9 cm⁴
ZyPlastic modulus, weak axis28.6 in³468.7 cm³
SySection modulus, weak axis18.4 in³301.5 cm³
ryRadius of gyration, weak axis1.92 in48.8 mm
JTorsional constant2.68 in⁴111.55 cm⁴
bf/2tfFlange slenderness6.61
h/twWeb slenderness49
Metric designationW610×113

Also known as

W610×113

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.