W16×50 Beam Dimensions & Properties
W Shapes (AISC) · W16: 16 in nominal depth
W16×50 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16.3 in (414.0 mm) deep with a 7.07 in (179.6 mm) flange, a 0.38 in (9.7 mm) web and a 0.63 in (16.0 mm) flange, and weighs 50 lb/ft (74.4 kg/m). Area 14.7 in² (9,484 mm²); strong-axis Ix = 659 in⁴ (27,429.7 cm⁴), Sx = 81 in³ (1,327.4 cm³), Zx = 92 in³ (1,507.6 cm³).
- dDepth
- 414.0 mm16.3 in16.3 in414.0 mm
- bfFlange width
- 179.6 mm7.07 in7.07 in179.6 mm
- twWeb thickness
- 9.7 mm0.38 in0.38 in9.7 mm
- tfFlange thickness
- 16.0 mm0.63 in0.63 in16.0 mm
Drawing
W16×50 specifications
| dDepth | 16.3 in414.0 mm |
|---|---|
| bfFlange width | 7.07 in179.6 mm |
| twWeb thickness | 0.38 in9.7 mm |
| tfFlange thickness | 0.63 in16.0 mm |
| kDesign value | 1.03 in26.2 mm |
| kDetailing value | 1 5/16 in33.3 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 50 lb/ft74.4 kg/m |
| AArea | 14.7 in²9,484 mm² |
| IxMoment of inertia, strong axis | 659 in⁴27,429.7 cm⁴ |
| ZxPlastic modulus, strong axis | 92 in³1,507.6 cm³ |
| SxSection modulus, strong axis | 81 in³1,327.4 cm³ |
| rxRadius of gyration, strong axis | 6.68 in169.7 mm |
| IyMoment of inertia, weak axis | 37.2 in⁴1,548.4 cm⁴ |
| ZyPlastic modulus, weak axis | 16.3 in³267.1 cm³ |
| SySection modulus, weak axis | 10.5 in³172.1 cm³ |
| ryRadius of gyration, weak axis | 1.59 in40.4 mm |
| JTorsional constant | 1.52 in⁴63.27 cm⁴ |
| bf/2tfFlange slenderness | 5.61 |
| h/twWeb slenderness | 37.4 |
| Metric designation | W410×75 |
Also known as
W410×75
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.