W14×257 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×257 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 16.4 in (416.6 mm) deep with a 16 in (406.4 mm) flange, a 1.18 in (30.0 mm) web and a 1.89 in (48.0 mm) flange, and weighs 257 lb/ft (382.5 kg/m). Area 75.6 in² (48,774 mm²); strong-axis Ix = 3,400 in⁴ (141,518.7 cm⁴), Sx = 415 in³ (6,800.6 cm³), Zx = 487 in³ (7,980.5 cm³).

dDepth
416.6 mm16.4 in16.4 in416.6 mm
bfFlange width
406.4 mm16 in16 in406.4 mm
twWeb thickness
30.0 mm1.18 in1.18 in30.0 mm
tfFlange thickness
48.0 mm1.89 in1.89 in48.0 mm

Drawing

406.4 mm16 in416.6 mm16.4 intf 48.0 mmtf 1.89 intw 30.0 mmtw 1.18 ink 63.2 mmk 2.49 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×257 specifications

dDepth16.4 in416.6 mm
bfFlange width16 in406.4 mm
twWeb thickness1.18 in30.0 mm
tfFlange thickness1.89 in48.0 mm
kDesign value2.49 in63.2 mm
kDetailing value3 3/16 in81.0 mm
k1Detailing value1 13/16 in46.0 mm
WWeight257 lb/ft382.5 kg/m
AArea75.6 in²48,774 mm²
IxMoment of inertia, strong axis3,400 in⁴141,518.7 cm⁴
ZxPlastic modulus, strong axis487 in³7,980.5 cm³
SxSection modulus, strong axis415 in³6,800.6 cm³
rxRadius of gyration, strong axis6.71 in170.4 mm
IyMoment of inertia, weak axis1,290 in⁴53,693.9 cm⁴
ZyPlastic modulus, weak axis246 in³4,031.2 cm³
SySection modulus, weak axis161 in³2,638.3 cm³
ryRadius of gyration, weak axis4.13 in104.9 mm
JTorsional constant79.1 in⁴3,292.39 cm⁴
bf/2tfFlange slenderness4.23
h/twWeb slenderness9.7
Metric designationW360×382

Also known as

W360×382

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.