W21×57 Beam Dimensions & Properties
W Shapes (AISC) · W21: 21 in nominal depth
W21×57 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.1 in (535.9 mm) deep with a 6.56 in (166.6 mm) flange, a 0.405 in (10.3 mm) web and a 0.65 in (16.5 mm) flange, and weighs 57 lb/ft (84.8 kg/m). Area 16.7 in² (10,774 mm²); strong-axis Ix = 1,170 in⁴ (48,699.1 cm⁴), Sx = 111 in³ (1,819 cm³), Zx = 129 in³ (2,113.9 cm³).
- dDepth
- 535.9 mm21.1 in21.1 in535.9 mm
- bfFlange width
- 166.6 mm6.56 in6.56 in166.6 mm
- twWeb thickness
- 10.3 mm0.405 in0.405 in10.3 mm
- tfFlange thickness
- 16.5 mm0.65 in0.65 in16.5 mm
Drawing
W21×57 specifications
| dDepth | 21.1 in535.9 mm |
|---|---|
| bfFlange width | 6.56 in166.6 mm |
| twWeb thickness | 0.405 in10.3 mm |
| tfFlange thickness | 0.65 in16.5 mm |
| kDesign value | 1.15 in29.2 mm |
| kDetailing value | 1 5/16 in33.3 mm |
| k1Detailing value | 13/16 in20.6 mm |
| WWeight | 57 lb/ft84.8 kg/m |
| AArea | 16.7 in²10,774 mm² |
| IxMoment of inertia, strong axis | 1,170 in⁴48,699.1 cm⁴ |
| ZxPlastic modulus, strong axis | 129 in³2,113.9 cm³ |
| SxSection modulus, strong axis | 111 in³1,819 cm³ |
| rxRadius of gyration, strong axis | 8.36 in212.3 mm |
| IyMoment of inertia, weak axis | 30.6 in⁴1,273.7 cm⁴ |
| ZyPlastic modulus, weak axis | 14.8 in³242.5 cm³ |
| SySection modulus, weak axis | 9.35 in³153.2 cm³ |
| ryRadius of gyration, weak axis | 1.35 in34.3 mm |
| JTorsional constant | 1.77 in⁴73.67 cm⁴ |
| bf/2tfFlange slenderness | 5.04 |
| h/twWeb slenderness | 46.3 |
| Metric designation | W530×85 |
Also known as
W530×85
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.