W27×84 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×84 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 26.7 in (678.2 mm) deep with a 10 in (254.0 mm) flange, a 0.46 in (11.7 mm) web and a 0.64 in (16.3 mm) flange, and weighs 84 lb/ft (125.0 kg/m). Area 24.7 in² (15,935 mm²); strong-axis Ix = 2,850 in⁴ (118,626 cm⁴), Sx = 213 in³ (3,490.4 cm³), Zx = 244 in³ (3,998.4 cm³).

dDepth
678.2 mm26.7 in26.7 in678.2 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
11.7 mm0.46 in0.46 in11.7 mm
tfFlange thickness
16.3 mm0.64 in0.64 in16.3 mm

Drawing

254.0 mm10 in678.2 mm26.7 intf 16.3 mmtf 0.64 intw 11.7 mmtw 0.46 ink 31.5 mmk 1.24 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×84 specifications

dDepth26.7 in678.2 mm
bfFlange width10 in254.0 mm
twWeb thickness0.46 in11.7 mm
tfFlange thickness0.64 in16.3 mm
kDesign value1.24 in31.5 mm
kDetailing value1 7/8 in47.6 mm
k1Detailing value1 7/16 in36.5 mm
WWeight84 lb/ft125.0 kg/m
AArea24.7 in²15,935 mm²
IxMoment of inertia, strong axis2,850 in⁴118,626 cm⁴
ZxPlastic modulus, strong axis244 in³3,998.4 cm³
SxSection modulus, strong axis213 in³3,490.4 cm³
rxRadius of gyration, strong axis10.7 in271.8 mm
IyMoment of inertia, weak axis106 in⁴4,412.1 cm⁴
ZyPlastic modulus, weak axis33.2 in³544.1 cm³
SySection modulus, weak axis21.2 in³347.4 cm³
ryRadius of gyration, weak axis2.07 in52.6 mm
JTorsional constant2.81 in⁴116.96 cm⁴
bf/2tfFlange slenderness7.78
h/twWeb slenderness52.7
Metric designationW690×125

Also known as

W690×125

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.