W24×84 Beam Dimensions & Properties
W Shapes (AISC) · W24: 24 in nominal depth
W24×84 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.1 in (612.1 mm) deep with a 9.02 in (229.1 mm) flange, a 0.47 in (11.9 mm) web and a 0.77 in (19.6 mm) flange, and weighs 84 lb/ft (125.0 kg/m). Area 24.7 in² (15,935 mm²); strong-axis Ix = 2,370 in⁴ (98,646.8 cm⁴), Sx = 196 in³ (3,211.9 cm³), Zx = 224 in³ (3,670.7 cm³).
- dDepth
- 612.1 mm24.1 in24.1 in612.1 mm
- bfFlange width
- 229.1 mm9.02 in9.02 in229.1 mm
- twWeb thickness
- 11.9 mm0.47 in0.47 in11.9 mm
- tfFlange thickness
- 19.6 mm0.77 in0.77 in19.6 mm
Drawing
W24×84 specifications
| dDepth | 24.1 in612.1 mm |
|---|---|
| bfFlange width | 9.02 in229.1 mm |
| twWeb thickness | 0.47 in11.9 mm |
| tfFlange thickness | 0.77 in19.6 mm |
| kDesign value | 1.27 in32.3 mm |
| kDetailing value | 2 1/16 in52.4 mm |
| k1Detailing value | 1 7/16 in36.5 mm |
| WWeight | 84 lb/ft125.0 kg/m |
| AArea | 24.7 in²15,935 mm² |
| IxMoment of inertia, strong axis | 2,370 in⁴98,646.8 cm⁴ |
| ZxPlastic modulus, strong axis | 224 in³3,670.7 cm³ |
| SxSection modulus, strong axis | 196 in³3,211.9 cm³ |
| rxRadius of gyration, strong axis | 9.79 in248.7 mm |
| IyMoment of inertia, weak axis | 94.4 in⁴3,929.2 cm⁴ |
| ZyPlastic modulus, weak axis | 32.6 in³534.2 cm³ |
| SySection modulus, weak axis | 20.9 in³342.5 cm³ |
| ryRadius of gyration, weak axis | 1.95 in49.5 mm |
| JTorsional constant | 3.7 in⁴154.01 cm⁴ |
| bf/2tfFlange slenderness | 5.86 |
| h/twWeb slenderness | 45.9 |
| Metric designation | W610×125 |
Also known as
W610×125
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.