W21×93 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×93 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 21.6 in (548.6 mm) deep with a 8.42 in (213.9 mm) flange, a 0.58 in (14.7 mm) web and a 0.93 in (23.6 mm) flange, and weighs 93 lb/ft (138.4 kg/m). Area 27.3 in² (17,613 mm²); strong-axis Ix = 2,070 in⁴ (86,159.9 cm⁴), Sx = 192 in³ (3,146.3 cm³), Zx = 221 in³ (3,621.5 cm³).

dDepth
548.6 mm21.6 in21.6 in548.6 mm
bfFlange width
213.9 mm8.42 in8.42 in213.9 mm
twWeb thickness
14.7 mm0.58 in0.58 in14.7 mm
tfFlange thickness
23.6 mm0.93 in0.93 in23.6 mm

Drawing

213.9 mm8.42 in548.6 mm21.6 intf 23.6 mmtf 0.93 intw 14.7 mmtw 0.58 ink 36.3 mmk 1.43 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×93 specifications

dDepth21.6 in548.6 mm
bfFlange width8.42 in213.9 mm
twWeb thickness0.58 in14.7 mm
tfFlange thickness0.93 in23.6 mm
kDesign value1.43 in36.3 mm
kDetailing value1 5/8 in41.3 mm
k1Detailing value15/16 in23.8 mm
WWeight93 lb/ft138.4 kg/m
AArea27.3 in²17,613 mm²
IxMoment of inertia, strong axis2,070 in⁴86,159.9 cm⁴
ZxPlastic modulus, strong axis221 in³3,621.5 cm³
SxSection modulus, strong axis192 in³3,146.3 cm³
rxRadius of gyration, strong axis8.7 in221.0 mm
IyMoment of inertia, weak axis92.9 in⁴3,866.8 cm⁴
ZyPlastic modulus, weak axis34.7 in³568.6 cm³
SySection modulus, weak axis22.1 in³362.2 cm³
ryRadius of gyration, weak axis1.84 in46.7 mm
JTorsional constant6.03 in⁴250.99 cm⁴
bf/2tfFlange slenderness4.53
h/twWeb slenderness32.3
Metric designationW530×138

Also known as

W530×138

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.