W24×55 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×55 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 23.6 in (599.4 mm) deep with a 7.01 in (178.1 mm) flange, a 0.395 in (10.0 mm) web and a 0.505 in (12.8 mm) flange, and weighs 55 lb/ft (81.8 kg/m). Area 16.2 in² (10,452 mm²); strong-axis Ix = 1,350 in⁴ (56,191.2 cm⁴), Sx = 114 in³ (1,868.1 cm³), Zx = 134 in³ (2,195.9 cm³).

dDepth
599.4 mm23.6 in23.6 in599.4 mm
bfFlange width
178.1 mm7.01 in7.01 in178.1 mm
twWeb thickness
10.0 mm0.395 in0.395 in10.0 mm
tfFlange thickness
12.8 mm0.505 in0.505 in12.8 mm

Drawing

178.1 mm7.01 in599.4 mm23.6 intf 12.8 mmtf 0.505 intw 10.0 mmtw 0.395 ink 25.7 mmk 1.01 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×55 specifications

dDepth23.6 in599.4 mm
bfFlange width7.01 in178.1 mm
twWeb thickness0.395 in10.0 mm
tfFlange thickness0.505 in12.8 mm
kDesign value1.01 in25.7 mm
kDetailing value1 7/16 in36.5 mm
k1Detailing value1 in25.4 mm
WWeight55 lb/ft81.8 kg/m
AArea16.2 in²10,452 mm²
IxMoment of inertia, strong axis1,350 in⁴56,191.2 cm⁴
ZxPlastic modulus, strong axis134 in³2,195.9 cm³
SxSection modulus, strong axis114 in³1,868.1 cm³
rxRadius of gyration, strong axis9.11 in231.4 mm
IyMoment of inertia, weak axis29.1 in⁴1,211.2 cm⁴
ZyPlastic modulus, weak axis13.3 in³217.9 cm³
SySection modulus, weak axis8.3 in³136 cm³
ryRadius of gyration, weak axis1.34 in34.0 mm
JTorsional constant1.18 in⁴49.12 cm⁴
bf/2tfFlange slenderness6.94
h/twWeb slenderness54.6
Metric designationW610×82

Also known as

W610×82

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.