W24×68 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×68 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 23.7 in (602.0 mm) deep with a 8.97 in (227.8 mm) flange, a 0.415 in (10.5 mm) web and a 0.585 in (14.9 mm) flange, and weighs 68 lb/ft (101.2 kg/m). Area 20.1 in² (12,968 mm²); strong-axis Ix = 1,830 in⁴ (76,170.4 cm⁴), Sx = 154 in³ (2,523.6 cm³), Zx = 177 in³ (2,900.5 cm³).

dDepth
602.0 mm23.7 in23.7 in602.0 mm
bfFlange width
227.8 mm8.97 in8.97 in227.8 mm
twWeb thickness
10.5 mm0.415 in0.415 in10.5 mm
tfFlange thickness
14.9 mm0.585 in0.585 in14.9 mm

Drawing

227.8 mm8.97 in602.0 mm23.7 intf 14.9 mmtf 0.585 intw 10.5 mmtw 0.415 ink 27.7 mmk 1.09 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×68 specifications

dDepth23.7 in602.0 mm
bfFlange width8.97 in227.8 mm
twWeb thickness0.415 in10.5 mm
tfFlange thickness0.585 in14.9 mm
kDesign value1.09 in27.7 mm
kDetailing value1 7/8 in47.6 mm
k1Detailing value1 7/16 in36.5 mm
WWeight68 lb/ft101.2 kg/m
AArea20.1 in²12,968 mm²
IxMoment of inertia, strong axis1,830 in⁴76,170.4 cm⁴
ZxPlastic modulus, strong axis177 in³2,900.5 cm³
SxSection modulus, strong axis154 in³2,523.6 cm³
rxRadius of gyration, strong axis9.55 in242.6 mm
IyMoment of inertia, weak axis70.4 in⁴2,930.3 cm⁴
ZyPlastic modulus, weak axis24.5 in³401.5 cm³
SySection modulus, weak axis15.7 in³257.3 cm³
ryRadius of gyration, weak axis1.87 in47.5 mm
JTorsional constant1.87 in⁴77.84 cm⁴
bf/2tfFlange slenderness7.66
h/twWeb slenderness52
Metric designationW610×101

Also known as

W610×101

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.