W24×94 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×94 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.3 in (617.2 mm) deep with a 9.07 in (230.4 mm) flange, a 0.515 in (13.1 mm) web and a 0.875 in (22.2 mm) flange, and weighs 94 lb/ft (139.9 kg/m). Area 27.7 in² (17,871 mm²); strong-axis Ix = 2,700 in⁴ (112,382.5 cm⁴), Sx = 222 in³ (3,637.9 cm³), Zx = 254 in³ (4,162.3 cm³).

dDepth
617.2 mm24.3 in24.3 in617.2 mm
bfFlange width
230.4 mm9.07 in9.07 in230.4 mm
twWeb thickness
13.1 mm0.515 in0.515 in13.1 mm
tfFlange thickness
22.2 mm0.875 in0.875 in22.2 mm

Drawing

230.4 mm9.07 in617.2 mm24.3 intf 22.2 mmtf 0.875 intw 13.1 mmtw 0.515 ink 35.1 mmk 1.38 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×94 specifications

dDepth24.3 in617.2 mm
bfFlange width9.07 in230.4 mm
twWeb thickness0.515 in13.1 mm
tfFlange thickness0.875 in22.2 mm
kDesign value1.38 in35.1 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 7/16 in36.5 mm
WWeight94 lb/ft139.9 kg/m
AArea27.7 in²17,871 mm²
IxMoment of inertia, strong axis2,700 in⁴112,382.5 cm⁴
ZxPlastic modulus, strong axis254 in³4,162.3 cm³
SxSection modulus, strong axis222 in³3,637.9 cm³
rxRadius of gyration, strong axis9.87 in250.7 mm
IyMoment of inertia, weak axis109 in⁴4,536.9 cm⁴
ZyPlastic modulus, weak axis37.5 in³614.5 cm³
SySection modulus, weak axis24 in³393.3 cm³
ryRadius of gyration, weak axis1.98 in50.3 mm
JTorsional constant5.26 in⁴218.94 cm⁴
bf/2tfFlange slenderness5.18
h/twWeb slenderness41.9
Metric designationW610×140

Also known as

W610×140

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.