W24×103 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×103 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.5 in (622.3 mm) deep with a 9 in (228.6 mm) flange, a 0.55 in (14.0 mm) web and a 0.98 in (24.9 mm) flange, and weighs 103 lb/ft (153.3 kg/m). Area 30.3 in² (19,548 mm²); strong-axis Ix = 3,000 in⁴ (124,869.4 cm⁴), Sx = 245 in³ (4,014.8 cm³), Zx = 280 in³ (4,588.4 cm³).

dDepth
622.3 mm24.5 in24.5 in622.3 mm
bfFlange width
228.6 mm9 in9 in228.6 mm
twWeb thickness
14.0 mm0.55 in0.55 in14.0 mm
tfFlange thickness
24.9 mm0.98 in0.98 in24.9 mm

Drawing

228.6 mm9 in622.3 mm24.5 intf 24.9 mmtf 0.98 intw 14.0 mmtw 0.55 ink 37.6 mmk 1.48 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×103 specifications

dDepth24.5 in622.3 mm
bfFlange width9 in228.6 mm
twWeb thickness0.55 in14.0 mm
tfFlange thickness0.98 in24.9 mm
kDesign value1.48 in37.6 mm
kDetailing value2 1/4 in57.2 mm
k1Detailing value1 1/2 in38.1 mm
WWeight103 lb/ft153.3 kg/m
AArea30.3 in²19,548 mm²
IxMoment of inertia, strong axis3,000 in⁴124,869.4 cm⁴
ZxPlastic modulus, strong axis280 in³4,588.4 cm³
SxSection modulus, strong axis245 in³4,014.8 cm³
rxRadius of gyration, strong axis10 in254.0 mm
IyMoment of inertia, weak axis119 in⁴4,953.2 cm⁴
ZyPlastic modulus, weak axis41.5 in³680.1 cm³
SySection modulus, weak axis26.5 in³434.3 cm³
ryRadius of gyration, weak axis1.99 in50.5 mm
JTorsional constant7.07 in⁴294.28 cm⁴
bf/2tfFlange slenderness4.59
h/twWeb slenderness39.2
Metric designationW610×153

Also known as

W610×153

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.