W18×97 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×97 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 18.6 in (472.4 mm) deep with a 11.1 in (281.9 mm) flange, a 0.535 in (13.6 mm) web and a 0.87 in (22.1 mm) flange, and weighs 97 lb/ft (144.4 kg/m). Area 28.5 in² (18,387 mm²); strong-axis Ix = 1,750 in⁴ (72,840.5 cm⁴), Sx = 188 in³ (3,080.8 cm³), Zx = 211 in³ (3,457.7 cm³).

dDepth
472.4 mm18.6 in18.6 in472.4 mm
bfFlange width
281.9 mm11.1 in11.1 in281.9 mm
twWeb thickness
13.6 mm0.535 in0.535 in13.6 mm
tfFlange thickness
22.1 mm0.87 in0.87 in22.1 mm

Drawing

281.9 mm11.1 in472.4 mm18.6 intf 22.1 mmtf 0.87 intw 13.6 mmtw 0.535 ink 32.3 mmk 1.27 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×97 specifications

dDepth18.6 in472.4 mm
bfFlange width11.1 in281.9 mm
twWeb thickness0.535 in13.6 mm
tfFlange thickness0.87 in22.1 mm
kDesign value1.27 in32.3 mm
kDetailing value1 3/4 in44.4 mm
k1Detailing value1 1/8 in28.6 mm
WWeight97 lb/ft144.4 kg/m
AArea28.5 in²18,387 mm²
IxMoment of inertia, strong axis1,750 in⁴72,840.5 cm⁴
ZxPlastic modulus, strong axis211 in³3,457.7 cm³
SxSection modulus, strong axis188 in³3,080.8 cm³
rxRadius of gyration, strong axis7.82 in198.6 mm
IyMoment of inertia, weak axis201 in⁴8,366.3 cm⁴
ZyPlastic modulus, weak axis55.3 in³906.2 cm³
SySection modulus, weak axis36.1 in³591.6 cm³
ryRadius of gyration, weak axis2.65 in67.3 mm
JTorsional constant5.86 in⁴243.91 cm⁴
bf/2tfFlange slenderness6.41
h/twWeb slenderness30
Metric designationW460×144

Also known as

W460×144

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.