W12×96 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×96 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.7 in (322.6 mm) deep with a 12.2 in (309.9 mm) flange, a 0.55 in (14.0 mm) web and a 0.9 in (22.9 mm) flange, and weighs 96 lb/ft (142.9 kg/m). Area 28.2 in² (18,194 mm²); strong-axis Ix = 833 in⁴ (34,672.1 cm⁴), Sx = 131 in³ (2,146.7 cm³), Zx = 147 in³ (2,408.9 cm³).

dDepth
322.6 mm12.7 in12.7 in322.6 mm
bfFlange width
309.9 mm12.2 in12.2 in309.9 mm
twWeb thickness
14.0 mm0.55 in0.55 in14.0 mm
tfFlange thickness
22.9 mm0.9 in0.9 in22.9 mm

Drawing

309.9 mm12.2 in322.6 mm12.7 intf 22.9 mmtf 0.9 intw 14.0 mmtw 0.55 ink 38.1 mmk 1.5 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×96 specifications

dDepth12.7 in322.6 mm
bfFlange width12.2 in309.9 mm
twWeb thickness0.55 in14.0 mm
tfFlange thickness0.9 in22.9 mm
kDesign value1.5 in38.1 mm
kDetailing value1 13/16 in46.0 mm
k1Detailing value1 1/8 in28.6 mm
WWeight96 lb/ft142.9 kg/m
AArea28.2 in²18,194 mm²
IxMoment of inertia, strong axis833 in⁴34,672.1 cm⁴
ZxPlastic modulus, strong axis147 in³2,408.9 cm³
SxSection modulus, strong axis131 in³2,146.7 cm³
rxRadius of gyration, strong axis5.44 in138.2 mm
IyMoment of inertia, weak axis270 in⁴11,238.2 cm⁴
ZyPlastic modulus, weak axis67.5 in³1,106.1 cm³
SySection modulus, weak axis44.4 in³727.6 cm³
ryRadius of gyration, weak axis3.09 in78.5 mm
JTorsional constant6.85 in⁴285.12 cm⁴
bf/2tfFlange slenderness6.76
h/twWeb slenderness17.7
Metric designationW310×143

Also known as

W310×143

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.