W27×94 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×94 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 26.9 in (683.3 mm) deep with a 10 in (254.0 mm) flange, a 0.49 in (12.4 mm) web and a 0.745 in (18.9 mm) flange, and weighs 94 lb/ft (139.9 kg/m). Area 27.6 in² (17,806 mm²); strong-axis Ix = 3,270 in⁴ (136,107.7 cm⁴), Sx = 243 in³ (3,982.1 cm³), Zx = 278 in³ (4,555.6 cm³).

dDepth
683.3 mm26.9 in26.9 in683.3 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
12.4 mm0.49 in0.49 in12.4 mm
tfFlange thickness
18.9 mm0.745 in0.745 in18.9 mm

Drawing

254.0 mm10 in683.3 mm26.9 intf 18.9 mmtf 0.745 intw 12.4 mmtw 0.49 ink 34.0 mmk 1.34 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×94 specifications

dDepth26.9 in683.3 mm
bfFlange width10 in254.0 mm
twWeb thickness0.49 in12.4 mm
tfFlange thickness0.745 in18.9 mm
kDesign value1.34 in34.0 mm
kDetailing value1 15/16 in49.2 mm
k1Detailing value1 7/16 in36.5 mm
WWeight94 lb/ft139.9 kg/m
AArea27.6 in²17,806 mm²
IxMoment of inertia, strong axis3,270 in⁴136,107.7 cm⁴
ZxPlastic modulus, strong axis278 in³4,555.6 cm³
SxSection modulus, strong axis243 in³3,982.1 cm³
rxRadius of gyration, strong axis10.9 in276.9 mm
IyMoment of inertia, weak axis124 in⁴5,161.3 cm⁴
ZyPlastic modulus, weak axis38.8 in³635.8 cm³
SySection modulus, weak axis24.8 in³406.4 cm³
ryRadius of gyration, weak axis2.12 in53.8 mm
JTorsional constant4.03 in⁴167.74 cm⁴
bf/2tfFlange slenderness6.7
h/twWeb slenderness49.5
Metric designationW690×140

Also known as

W690×140

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.