W12×87 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×87 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 12.5 in (317.5 mm) deep with a 12.1 in (307.3 mm) flange, a 0.515 in (13.1 mm) web and a 0.81 in (20.6 mm) flange, and weighs 87 lb/ft (129.5 kg/m). Area 25.6 in² (16,516 mm²); strong-axis Ix = 740 in⁴ (30,801.1 cm⁴), Sx = 118 in³ (1,933.7 cm³), Zx = 132 in³ (2,163.1 cm³).

dDepth
317.5 mm12.5 in12.5 in317.5 mm
bfFlange width
307.3 mm12.1 in12.1 in307.3 mm
twWeb thickness
13.1 mm0.515 in0.515 in13.1 mm
tfFlange thickness
20.6 mm0.81 in0.81 in20.6 mm

Drawing

307.3 mm12.1 in317.5 mm12.5 intf 20.6 mmtf 0.81 intw 13.1 mmtw 0.515 ink 35.8 mmk 1.41 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×87 specifications

dDepth12.5 in317.5 mm
bfFlange width12.1 in307.3 mm
twWeb thickness0.515 in13.1 mm
tfFlange thickness0.81 in20.6 mm
kDesign value1.41 in35.8 mm
kDetailing value1 11/16 in42.9 mm
k1Detailing value1 1/16 in27.0 mm
WWeight87 lb/ft129.5 kg/m
AArea25.6 in²16,516 mm²
IxMoment of inertia, strong axis740 in⁴30,801.1 cm⁴
ZxPlastic modulus, strong axis132 in³2,163.1 cm³
SxSection modulus, strong axis118 in³1,933.7 cm³
rxRadius of gyration, strong axis5.38 in136.7 mm
IyMoment of inertia, weak axis241 in⁴10,031.2 cm⁴
ZyPlastic modulus, weak axis60.4 in³989.8 cm³
SySection modulus, weak axis39.7 in³650.6 cm³
ryRadius of gyration, weak axis3.07 in78.0 mm
JTorsional constant5.1 in⁴212.28 cm⁴
bf/2tfFlange slenderness7.48
h/twWeb slenderness18.9
Metric designationW310×129

Also known as

W310×129

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.