W27×102 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×102 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 27.1 in (688.3 mm) deep with a 10 in (254.0 mm) flange, a 0.515 in (13.1 mm) web and a 0.83 in (21.1 mm) flange, and weighs 102 lb/ft (151.8 kg/m). Area 30 in² (19,355 mm²); strong-axis Ix = 3,620 in⁴ (150,675.8 cm⁴), Sx = 267 in³ (4,375.3 cm³), Zx = 305 in³ (4,998.1 cm³).

dDepth
688.3 mm27.1 in27.1 in688.3 mm
bfFlange width
254.0 mm10 in10 in254.0 mm
twWeb thickness
13.1 mm0.515 in0.515 in13.1 mm
tfFlange thickness
21.1 mm0.83 in0.83 in21.1 mm

Drawing

254.0 mm10 in688.3 mm27.1 intf 21.1 mmtf 0.83 intw 13.1 mmtw 0.515 ink 36.3 mmk 1.43 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×102 specifications

dDepth27.1 in688.3 mm
bfFlange width10 in254.0 mm
twWeb thickness0.515 in13.1 mm
tfFlange thickness0.83 in21.1 mm
kDesign value1.43 in36.3 mm
kDetailing value2 1/16 in52.4 mm
k1Detailing value1 7/16 in36.5 mm
WWeight102 lb/ft151.8 kg/m
AArea30 in²19,355 mm²
IxMoment of inertia, strong axis3,620 in⁴150,675.8 cm⁴
ZxPlastic modulus, strong axis305 in³4,998.1 cm³
SxSection modulus, strong axis267 in³4,375.3 cm³
rxRadius of gyration, strong axis11 in279.4 mm
IyMoment of inertia, weak axis139 in⁴5,785.6 cm⁴
ZyPlastic modulus, weak axis43.4 in³711.2 cm³
SySection modulus, weak axis27.8 in³455.6 cm³
ryRadius of gyration, weak axis2.15 in54.6 mm
JTorsional constant5.28 in⁴219.77 cm⁴
bf/2tfFlange slenderness6.03
h/twWeb slenderness47.1
Metric designationW690×152

Also known as

W690×152

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.