W30×391 Beam Dimensions & Properties
W Shapes (AISC) · W30: 30 in nominal depth
W30×391 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 33.2 in (843.3 mm) deep with a 15.6 in (396.2 mm) flange, a 1.36 in (34.5 mm) web and a 2.44 in (62.0 mm) flange, and weighs 391 lb/ft (581.9 kg/m). Area 115 in² (74,193 mm²); strong-axis Ix = 20,700 in⁴ (861,599.1 cm⁴), Sx = 1,250 in³ (20,483.8 cm³), Zx = 1,450 in³ (23,761.2 cm³).
- dDepth
- 843.3 mm33.2 in33.2 in843.3 mm
- bfFlange width
- 396.2 mm15.6 in15.6 in396.2 mm
- twWeb thickness
- 34.5 mm1.36 in1.36 in34.5 mm
- tfFlange thickness
- 62.0 mm2.44 in2.44 in62.0 mm
Drawing
W30×391 specifications
| dDepth | 33.2 in843.3 mm |
|---|---|
| bfFlange width | 15.6 in396.2 mm |
| twWeb thickness | 1.36 in34.5 mm |
| tfFlange thickness | 2.44 in62.0 mm |
| kDesign value | 3.23 in82.0 mm |
| kDetailing value | 3 3/4 in95.3 mm |
| k1Detailing value | 1 7/8 in47.6 mm |
| WWeight | 391 lb/ft581.9 kg/m |
| AArea | 115 in²74,193 mm² |
| IxMoment of inertia, strong axis | 20,700 in⁴861,599.1 cm⁴ |
| ZxPlastic modulus, strong axis | 1,450 in³23,761.2 cm³ |
| SxSection modulus, strong axis | 1,250 in³20,483.8 cm³ |
| rxRadius of gyration, strong axis | 13.4 in340.4 mm |
| IyMoment of inertia, weak axis | 1,550 in⁴64,515.9 cm⁴ |
| ZyPlastic modulus, weak axis | 310 in³5,080 cm³ |
| SySection modulus, weak axis | 198 in³3,244.6 cm³ |
| ryRadius of gyration, weak axis | 3.67 in93.2 mm |
| JTorsional constant | 173 in⁴7,200.8 cm⁴ |
| bf/2tfFlange slenderness | 3.19 |
| h/twWeb slenderness | 19.7 |
| Metric designation | W760×582 |
Also known as
W760×582
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.