W30×357 Beam Dimensions & Properties
W Shapes (AISC) · W30: 30 in nominal depth
W30×357 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 32.8 in (833.1 mm) deep with a 15.5 in (393.7 mm) flange, a 1.24 in (31.5 mm) web and a 2.24 in (56.9 mm) flange, and weighs 357 lb/ft (531.3 kg/m). Area 105 in² (67,742 mm²); strong-axis Ix = 18,700 in⁴ (778,352.8 cm⁴), Sx = 1,140 in³ (18,681.3 cm³), Zx = 1,320 in³ (21,630.9 cm³).
- dDepth
- 833.1 mm32.8 in32.8 in833.1 mm
- bfFlange width
- 393.7 mm15.5 in15.5 in393.7 mm
- twWeb thickness
- 31.5 mm1.24 in1.24 in31.5 mm
- tfFlange thickness
- 56.9 mm2.24 in2.24 in56.9 mm
Drawing
W30×357 specifications
| dDepth | 32.8 in833.1 mm |
|---|---|
| bfFlange width | 15.5 in393.7 mm |
| twWeb thickness | 1.24 in31.5 mm |
| tfFlange thickness | 2.24 in56.9 mm |
| kDesign value | 3.03 in77.0 mm |
| kDetailing value | 3 1/2 in88.9 mm |
| k1Detailing value | 1 13/16 in46.0 mm |
| WWeight | 357 lb/ft531.3 kg/m |
| AArea | 105 in²67,742 mm² |
| IxMoment of inertia, strong axis | 18,700 in⁴778,352.8 cm⁴ |
| ZxPlastic modulus, strong axis | 1,320 in³21,630.9 cm³ |
| SxSection modulus, strong axis | 1,140 in³18,681.3 cm³ |
| rxRadius of gyration, strong axis | 13.3 in337.8 mm |
| IyMoment of inertia, weak axis | 1,390 in⁴57,856.2 cm⁴ |
| ZyPlastic modulus, weak axis | 279 in³4,572 cm³ |
| SySection modulus, weak axis | 179 in³2,933.3 cm³ |
| ryRadius of gyration, weak axis | 3.64 in92.5 mm |
| JTorsional constant | 134 in⁴5,577.5 cm⁴ |
| bf/2tfFlange slenderness | 3.45 |
| h/twWeb slenderness | 21.6 |
| Metric designation | W760×531 |
Also known as
W760×531
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.