W33×387 Beam Dimensions & Properties

W Shapes (AISC) · W33: 33 in nominal depth

W33×387 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 36 in (914.4 mm) deep with a 16.2 in (411.5 mm) flange, a 1.26 in (32.0 mm) web and a 2.28 in (57.9 mm) flange, and weighs 387 lb/ft (575.9 kg/m). Area 114 in² (73,548 mm²); strong-axis Ix = 24,300 in⁴ (1,011,442.4 cm⁴), Sx = 1,350 in³ (22,122.5 cm³), Zx = 1,560 in³ (25,563.8 cm³).

dDepth
914.4 mm36 in36 in914.4 mm
bfFlange width
411.5 mm16.2 in16.2 in411.5 mm
twWeb thickness
32.0 mm1.26 in1.26 in32.0 mm
tfFlange thickness
57.9 mm2.28 in2.28 in57.9 mm

Drawing

411.5 mm16.2 in914.4 mm36 intf 57.9 mmtf 2.28 intw 32.0 mmtw 1.26 ink 78.0 mmk 3.07 in
Drawn to scale · Dimensions in mmDimensions in inches

W33×387 specifications

dDepth36 in914.4 mm
bfFlange width16.2 in411.5 mm
twWeb thickness1.26 in32.0 mm
tfFlange thickness2.28 in57.9 mm
kDesign value3.07 in78.0 mm
kDetailing value3 9/16 in90.5 mm
k1Detailing value1 13/16 in46.0 mm
WWeight387 lb/ft575.9 kg/m
AArea114 in²73,548 mm²
IxMoment of inertia, strong axis24,300 in⁴1,011,442.4 cm⁴
ZxPlastic modulus, strong axis1,560 in³25,563.8 cm³
SxSection modulus, strong axis1,350 in³22,122.5 cm³
rxRadius of gyration, strong axis14.6 in370.8 mm
IyMoment of inertia, weak axis1,620 in⁴67,429.5 cm⁴
ZyPlastic modulus, weak axis312 in³5,112.8 cm³
SySection modulus, weak axis200 in³3,277.4 cm³
ryRadius of gyration, weak axis3.77 in95.8 mm
JTorsional constant148 in⁴6,160.23 cm⁴
bf/2tfFlange slenderness3.55
h/twWeb slenderness23.7
Metric designationW840×576

Also known as

W840×576

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.