W36×387 Beam Dimensions & Properties
W Shapes (AISC) · W36: 36 in nominal depth
W36×387 is an AISC wide-flange shape (W36: 36 in nominal depth). It is 39.1 in (993.1 mm) deep with a 12.7 in (322.6 mm) flange, a 1.42 in (36.1 mm) web and a 2.56 in (65.0 mm) flange, and weighs 387 lb/ft (575.9 kg/m). Area 114 in² (73,548 mm²); strong-axis Ix = 26,500 in⁴ (1,103,013.3 cm⁴), Sx = 1,360 in³ (22,286.4 cm³), Zx = 1,610 in³ (26,383.2 cm³).
- dDepth
- 993.1 mm39.1 in39.1 in993.1 mm
- bfFlange width
- 322.6 mm12.7 in12.7 in322.6 mm
- twWeb thickness
- 36.1 mm1.42 in1.42 in36.1 mm
- tfFlange thickness
- 65.0 mm2.56 in2.56 in65.0 mm
Drawing
W36×387 specifications
| dDepth | 39.1 in993.1 mm |
|---|---|
| bfFlange width | 12.7 in322.6 mm |
| twWeb thickness | 1.42 in36.1 mm |
| tfFlange thickness | 2.56 in65.0 mm |
| kDesign value | 3.31 in84.1 mm |
| kDetailing value | 3 13/16 in96.8 mm |
| k1Detailing value | 1 15/16 in49.2 mm |
| WWeight | 387 lb/ft575.9 kg/m |
| AArea | 114 in²73,548 mm² |
| IxMoment of inertia, strong axis | 26,500 in⁴1,103,013.3 cm⁴ |
| ZxPlastic modulus, strong axis | 1,610 in³26,383.2 cm³ |
| SxSection modulus, strong axis | 1,360 in³22,286.4 cm³ |
| rxRadius of gyration, strong axis | 15.2 in386.1 mm |
| IyMoment of inertia, weak axis | 882 in⁴36,711.6 cm⁴ |
| ZyPlastic modulus, weak axis | 224 in³3,670.7 cm³ |
| SySection modulus, weak axis | 139 in³2,277.8 cm³ |
| ryRadius of gyration, weak axis | 2.78 in70.6 mm |
| JTorsional constant | 172 in⁴7,159.18 cm⁴ |
| bf/2tfFlange slenderness | 2.48 |
| h/twWeb slenderness | 22.9 |
| Metric designation | W920×576 |
Also known as
W920×576
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.