W30×90 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×90 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 29.5 in (749.3 mm) deep with a 10.4 in (264.2 mm) flange, a 0.47 in (11.9 mm) web and a 0.61 in (15.5 mm) flange, and weighs 90 lb/ft (133.9 kg/m). Area 26.3 in² (16,968 mm²); strong-axis Ix = 3,610 in⁴ (150,259.5 cm⁴), Sx = 245 in³ (4,014.8 cm³), Zx = 283 in³ (4,637.5 cm³).

dDepth
749.3 mm29.5 in29.5 in749.3 mm
bfFlange width
264.2 mm10.4 in10.4 in264.2 mm
twWeb thickness
11.9 mm0.47 in0.47 in11.9 mm
tfFlange thickness
15.5 mm0.61 in0.61 in15.5 mm

Drawing

264.2 mm10.4 in749.3 mm29.5 intf 15.5 mmtf 0.61 intw 11.9 mmtw 0.47 ink 32.0 mmk 1.26 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×90 specifications

dDepth29.5 in749.3 mm
bfFlange width10.4 in264.2 mm
twWeb thickness0.47 in11.9 mm
tfFlange thickness0.61 in15.5 mm
kDesign value1.26 in32.0 mm
kDetailing value1 7/8 in47.6 mm
k1Detailing value1 7/16 in36.5 mm
WWeight90 lb/ft133.9 kg/m
AArea26.3 in²16,968 mm²
IxMoment of inertia, strong axis3,610 in⁴150,259.5 cm⁴
ZxPlastic modulus, strong axis283 in³4,637.5 cm³
SxSection modulus, strong axis245 in³4,014.8 cm³
rxRadius of gyration, strong axis11.7 in297.2 mm
IyMoment of inertia, weak axis115 in⁴4,786.7 cm⁴
ZyPlastic modulus, weak axis34.7 in³568.6 cm³
SySection modulus, weak axis22.1 in³362.2 cm³
ryRadius of gyration, weak axis2.09 in53.1 mm
JTorsional constant2.84 in⁴118.21 cm⁴
bf/2tfFlange slenderness8.52
h/twWeb slenderness57.5
Metric designationW760×134

Also known as

W760×134

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.