W10×88 Beam Dimensions & Properties

W Shapes (AISC) · W10: 10 in nominal depth

W10×88 is an AISC wide-flange shape (W10: 10 in nominal depth). It is 10.8 in (274.3 mm) deep with a 10.3 in (261.6 mm) flange, a 0.605 in (15.4 mm) web and a 0.99 in (25.1 mm) flange, and weighs 88 lb/ft (131.0 kg/m). Area 26 in² (16,774 mm²); strong-axis Ix = 534 in⁴ (22,226.8 cm⁴), Sx = 98.5 in³ (1,614.1 cm³), Zx = 113 in³ (1,851.7 cm³).

dDepth
274.3 mm10.8 in10.8 in274.3 mm
bfFlange width
261.6 mm10.3 in10.3 in261.6 mm
twWeb thickness
15.4 mm0.605 in0.605 in15.4 mm
tfFlange thickness
25.1 mm0.99 in0.99 in25.1 mm

Drawing

261.6 mm10.3 in274.3 mm10.8 intf 25.1 mmtf 0.99 intw 15.4 mmtw 0.605 ink 37.8 mmk 1.49 in
Drawn to scale · Dimensions in mmDimensions in inches

W10×88 specifications

dDepth10.8 in274.3 mm
bfFlange width10.3 in261.6 mm
twWeb thickness0.605 in15.4 mm
tfFlange thickness0.99 in25.1 mm
kDesign value1.49 in37.8 mm
kDetailing value1 11/16 in42.9 mm
k1Detailing value15/16 in23.8 mm
WWeight88 lb/ft131.0 kg/m
AArea26 in²16,774 mm²
IxMoment of inertia, strong axis534 in⁴22,226.8 cm⁴
ZxPlastic modulus, strong axis113 in³1,851.7 cm³
SxSection modulus, strong axis98.5 in³1,614.1 cm³
rxRadius of gyration, strong axis4.54 in115.3 mm
IyMoment of inertia, weak axis179 in⁴7,450.5 cm⁴
ZyPlastic modulus, weak axis53.1 in³870.2 cm³
SySection modulus, weak axis34.8 in³570.3 cm³
ryRadius of gyration, weak axis2.63 in66.8 mm
JTorsional constant7.53 in⁴313.42 cm⁴
bf/2tfFlange slenderness5.18
h/twWeb slenderness13
Metric designationW250×131

Also known as

W250×131

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.