W14×90 Beam Dimensions & Properties

W Shapes (AISC) · W14: 14 in nominal depth

W14×90 is an AISC wide-flange shape (W14: 14 in nominal depth). It is 14 in (355.6 mm) deep with a 14.5 in (368.3 mm) flange, a 0.44 in (11.2 mm) web and a 0.71 in (18.0 mm) flange, and weighs 90 lb/ft (133.9 kg/m). Area 26.5 in² (17,097 mm²); strong-axis Ix = 999 in⁴ (41,581.5 cm⁴), Sx = 143 in³ (2,343.4 cm³), Zx = 157 in³ (2,572.8 cm³).

dDepth
355.6 mm14 in14 in355.6 mm
bfFlange width
368.3 mm14.5 in14.5 in368.3 mm
twWeb thickness
11.2 mm0.44 in0.44 in11.2 mm
tfFlange thickness
18.0 mm0.71 in0.71 in18.0 mm

Drawing

368.3 mm14.5 in355.6 mm14 intf 18.0 mmtf 0.71 intw 11.2 mmtw 0.44 ink 33.3 mmk 1.31 in
Drawn to scale · Dimensions in mmDimensions in inches

W14×90 specifications

dDepth14 in355.6 mm
bfFlange width14.5 in368.3 mm
twWeb thickness0.44 in11.2 mm
tfFlange thickness0.71 in18.0 mm
kDesign value1.31 in33.3 mm
kDetailing value2 in50.8 mm
k1Detailing value1 7/16 in36.5 mm
WWeight90 lb/ft133.9 kg/m
AArea26.5 in²17,097 mm²
IxMoment of inertia, strong axis999 in⁴41,581.5 cm⁴
ZxPlastic modulus, strong axis157 in³2,572.8 cm³
SxSection modulus, strong axis143 in³2,343.4 cm³
rxRadius of gyration, strong axis6.14 in156.0 mm
IyMoment of inertia, weak axis362 in⁴15,067.6 cm⁴
ZyPlastic modulus, weak axis75.6 in³1,238.9 cm³
SySection modulus, weak axis49.9 in³817.7 cm³
ryRadius of gyration, weak axis3.7 in94.0 mm
JTorsional constant4.06 in⁴168.99 cm⁴
bf/2tfFlange slenderness10.2
h/twWeb slenderness25.9
Metric designationW360×134

Also known as

W360×134

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.