W16×89 Beam Dimensions & Properties

W Shapes (AISC) · W16: 16 in nominal depth

W16×89 is an AISC wide-flange shape (W16: 16 in nominal depth). It is 16.8 in (426.7 mm) deep with a 10.4 in (264.2 mm) flange, a 0.525 in (13.3 mm) web and a 0.875 in (22.2 mm) flange, and weighs 89 lb/ft (132.4 kg/m). Area 26.2 in² (16,903 mm²); strong-axis Ix = 1,300 in⁴ (54,110.1 cm⁴), Sx = 155 in³ (2,540 cm³), Zx = 175 in³ (2,867.7 cm³).

dDepth
426.7 mm16.8 in16.8 in426.7 mm
bfFlange width
264.2 mm10.4 in10.4 in264.2 mm
twWeb thickness
13.3 mm0.525 in0.525 in13.3 mm
tfFlange thickness
22.2 mm0.875 in0.875 in22.2 mm

Drawing

264.2 mm10.4 in426.7 mm16.8 intf 22.2 mmtf 0.875 intw 13.3 mmtw 0.525 ink 32.5 mmk 1.28 in
Drawn to scale · Dimensions in mmDimensions in inches

W16×89 specifications

dDepth16.8 in426.7 mm
bfFlange width10.4 in264.2 mm
twWeb thickness0.525 in13.3 mm
tfFlange thickness0.875 in22.2 mm
kDesign value1.28 in32.5 mm
kDetailing value1 3/4 in44.4 mm
k1Detailing value1 1/16 in27.0 mm
WWeight89 lb/ft132.4 kg/m
AArea26.2 in²16,903 mm²
IxMoment of inertia, strong axis1,300 in⁴54,110.1 cm⁴
ZxPlastic modulus, strong axis175 in³2,867.7 cm³
SxSection modulus, strong axis155 in³2,540 cm³
rxRadius of gyration, strong axis7.05 in179.1 mm
IyMoment of inertia, weak axis163 in⁴6,784.6 cm⁴
ZyPlastic modulus, weak axis48.1 in³788.2 cm³
SySection modulus, weak axis31.4 in³514.6 cm³
ryRadius of gyration, weak axis2.49 in63.2 mm
JTorsional constant5.45 in⁴226.85 cm⁴
bf/2tfFlange slenderness5.92
h/twWeb slenderness27
Metric designationW410×132

Also known as

W410×132

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.