W33×141 Beam Dimensions & Properties

W Shapes (AISC) · W33: 33 in nominal depth

W33×141 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 33.3 in (845.8 mm) deep with a 11.5 in (292.1 mm) flange, a 0.605 in (15.4 mm) web and a 0.96 in (24.4 mm) flange, and weighs 141 lb/ft (209.8 kg/m). Area 41.5 in² (26,774 mm²); strong-axis Ix = 7,450 in⁴ (310,092.4 cm⁴), Sx = 448 in³ (7,341.4 cm³), Zx = 514 in³ (8,423 cm³).

dDepth
845.8 mm33.3 in33.3 in845.8 mm
bfFlange width
292.1 mm11.5 in11.5 in292.1 mm
twWeb thickness
15.4 mm0.605 in0.605 in15.4 mm
tfFlange thickness
24.4 mm0.96 in0.96 in24.4 mm

Drawing

292.1 mm11.5 in845.8 mm33.3 intf 24.4 mmtf 0.96 intw 15.4 mmtw 0.605 ink 42.2 mmk 1.66 in
Drawn to scale · Dimensions in mmDimensions in inches

W33×141 specifications

dDepth33.3 in845.8 mm
bfFlange width11.5 in292.1 mm
twWeb thickness0.605 in15.4 mm
tfFlange thickness0.96 in24.4 mm
kDesign value1.66 in42.2 mm
kDetailing value2 3/16 in55.6 mm
k1Detailing value1 1/2 in38.1 mm
WWeight141 lb/ft209.8 kg/m
AArea41.5 in²26,774 mm²
IxMoment of inertia, strong axis7,450 in⁴310,092.4 cm⁴
ZxPlastic modulus, strong axis514 in³8,423 cm³
SxSection modulus, strong axis448 in³7,341.4 cm³
rxRadius of gyration, strong axis13.4 in340.4 mm
IyMoment of inertia, weak axis246 in⁴10,239.3 cm⁴
ZyPlastic modulus, weak axis66.9 in³1,096.3 cm³
SySection modulus, weak axis42.7 in³699.7 cm³
ryRadius of gyration, weak axis2.43 in61.7 mm
JTorsional constant9.7 in⁴403.74 cm⁴
bf/2tfFlange slenderness6.01
h/twWeb slenderness49.6
Metric designationW840×210

Also known as

W840×210

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.