W18×143 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×143 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 19.5 in (495.3 mm) deep with a 11.2 in (284.5 mm) flange, a 0.73 in (18.5 mm) web and a 1.32 in (33.5 mm) flange, and weighs 143 lb/ft (212.8 kg/m). Area 42 in² (27,097 mm²); strong-axis Ix = 2,750 in⁴ (114,463.6 cm⁴), Sx = 282 in³ (4,621.2 cm³), Zx = 322 in³ (5,276.6 cm³).

dDepth
495.3 mm19.5 in19.5 in495.3 mm
bfFlange width
284.5 mm11.2 in11.2 in284.5 mm
twWeb thickness
18.5 mm0.73 in0.73 in18.5 mm
tfFlange thickness
33.5 mm1.32 in1.32 in33.5 mm

Drawing

284.5 mm11.2 in495.3 mm19.5 intf 33.5 mmtf 1.32 intw 18.5 mmtw 0.73 ink 43.7 mmk 1.72 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×143 specifications

dDepth19.5 in495.3 mm
bfFlange width11.2 in284.5 mm
twWeb thickness0.73 in18.5 mm
tfFlange thickness1.32 in33.5 mm
kDesign value1.72 in43.7 mm
kDetailing value2 3/16 in55.6 mm
k1Detailing value1 3/16 in30.2 mm
WWeight143 lb/ft212.8 kg/m
AArea42 in²27,097 mm²
IxMoment of inertia, strong axis2,750 in⁴114,463.6 cm⁴
ZxPlastic modulus, strong axis322 in³5,276.6 cm³
SxSection modulus, strong axis282 in³4,621.2 cm³
rxRadius of gyration, strong axis8.09 in205.5 mm
IyMoment of inertia, weak axis311 in⁴12,944.8 cm⁴
ZyPlastic modulus, weak axis85.4 in³1,399.5 cm³
SySection modulus, weak axis55.5 in³909.5 cm³
ryRadius of gyration, weak axis2.72 in69.1 mm
JTorsional constant19.2 in⁴799.16 cm⁴
bf/2tfFlange slenderness4.25
h/twWeb slenderness22
Metric designationW460×213

Also known as

W460×213

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.