W12×136 Beam Dimensions & Properties

W Shapes (AISC) · W12: 12 in nominal depth

W12×136 is an AISC wide-flange shape (W12: 12 in nominal depth). It is 13.4 in (340.4 mm) deep with a 12.4 in (315.0 mm) flange, a 0.79 in (20.1 mm) web and a 1.25 in (31.8 mm) flange, and weighs 136 lb/ft (202.4 kg/m). Area 39.9 in² (25,742 mm²); strong-axis Ix = 1,240 in⁴ (51,612.7 cm⁴), Sx = 186 in³ (3,048 cm³), Zx = 214 in³ (3,506.8 cm³).

dDepth
340.4 mm13.4 in13.4 in340.4 mm
bfFlange width
315.0 mm12.4 in12.4 in315.0 mm
twWeb thickness
20.1 mm0.79 in0.79 in20.1 mm
tfFlange thickness
31.8 mm1.25 in1.25 in31.8 mm

Drawing

315.0 mm12.4 in340.4 mm13.4 intf 31.8 mmtf 1.25 intw 20.1 mmtw 0.79 ink 47.0 mmk 1.85 in
Drawn to scale · Dimensions in mmDimensions in inches

W12×136 specifications

dDepth13.4 in340.4 mm
bfFlange width12.4 in315.0 mm
twWeb thickness0.79 in20.1 mm
tfFlange thickness1.25 in31.8 mm
kDesign value1.85 in47.0 mm
kDetailing value2 1/8 in54.0 mm
k1Detailing value1 1/4 in31.8 mm
WWeight136 lb/ft202.4 kg/m
AArea39.9 in²25,742 mm²
IxMoment of inertia, strong axis1,240 in⁴51,612.7 cm⁴
ZxPlastic modulus, strong axis214 in³3,506.8 cm³
SxSection modulus, strong axis186 in³3,048 cm³
rxRadius of gyration, strong axis5.58 in141.7 mm
IyMoment of inertia, weak axis398 in⁴16,566 cm⁴
ZyPlastic modulus, weak axis98 in³1,605.9 cm³
SySection modulus, weak axis64.2 in³1,052 cm³
ryRadius of gyration, weak axis3.16 in80.3 mm
JTorsional constant18.5 in⁴770.03 cm⁴
bf/2tfFlange slenderness4.96
h/twWeb slenderness12.3
Metric designationW310×202

Also known as

W310×202

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.