W24×146 Beam Dimensions & Properties

W Shapes (AISC) · W24: 24 in nominal depth

W24×146 is an AISC wide-flange shape (W24: 24 in nominal depth). It is 24.7 in (627.4 mm) deep with a 12.9 in (327.7 mm) flange, a 0.65 in (16.5 mm) web and a 1.09 in (27.7 mm) flange, and weighs 146 lb/ft (217.3 kg/m). Area 43 in² (27,742 mm²); strong-axis Ix = 4,580 in⁴ (190,634 cm⁴), Sx = 371 in³ (6,079.6 cm³), Zx = 418 in³ (6,849.8 cm³).

dDepth
627.4 mm24.7 in24.7 in627.4 mm
bfFlange width
327.7 mm12.9 in12.9 in327.7 mm
twWeb thickness
16.5 mm0.65 in0.65 in16.5 mm
tfFlange thickness
27.7 mm1.09 in1.09 in27.7 mm

Drawing

327.7 mm12.9 in627.4 mm24.7 intf 27.7 mmtf 1.09 intw 16.5 mmtw 0.65 ink 40.4 mmk 1.59 in
Drawn to scale · Dimensions in mmDimensions in inches

W24×146 specifications

dDepth24.7 in627.4 mm
bfFlange width12.9 in327.7 mm
twWeb thickness0.65 in16.5 mm
tfFlange thickness1.09 in27.7 mm
kDesign value1.59 in40.4 mm
kDetailing value2 3/8 in60.3 mm
k1Detailing value1 9/16 in39.7 mm
WWeight146 lb/ft217.3 kg/m
AArea43 in²27,742 mm²
IxMoment of inertia, strong axis4,580 in⁴190,634 cm⁴
ZxPlastic modulus, strong axis418 in³6,849.8 cm³
SxSection modulus, strong axis371 in³6,079.6 cm³
rxRadius of gyration, strong axis10.3 in261.6 mm
IyMoment of inertia, weak axis391 in⁴16,274.6 cm⁴
ZyPlastic modulus, weak axis93.2 in³1,527.3 cm³
SySection modulus, weak axis60.5 in³991.4 cm³
ryRadius of gyration, weak axis3.01 in76.5 mm
JTorsional constant13.4 in⁴557.75 cm⁴
bf/2tfFlange slenderness5.92
h/twWeb slenderness33.2
Metric designationW610×217

Also known as

W610×217

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.