W33×130 Beam Dimensions & Properties
W Shapes (AISC) · W33: 33 in nominal depth
W33×130 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 33.1 in (840.7 mm) deep with a 11.5 in (292.1 mm) flange, a 0.58 in (14.7 mm) web and a 0.855 in (21.7 mm) flange, and weighs 130 lb/ft (193.5 kg/m). Area 38.3 in² (24,710 mm²); strong-axis Ix = 6,710 in⁴ (279,291.3 cm⁴), Sx = 406 in³ (6,653.1 cm³), Zx = 467 in³ (7,652.8 cm³).
- dDepth
- 840.7 mm33.1 in33.1 in840.7 mm
- bfFlange width
- 292.1 mm11.5 in11.5 in292.1 mm
- twWeb thickness
- 14.7 mm0.58 in0.58 in14.7 mm
- tfFlange thickness
- 21.7 mm0.855 in0.855 in21.7 mm
Drawing
W33×130 specifications
| dDepth | 33.1 in840.7 mm |
|---|---|
| bfFlange width | 11.5 in292.1 mm |
| twWeb thickness | 0.58 in14.7 mm |
| tfFlange thickness | 0.855 in21.7 mm |
| kDesign value | 1.56 in39.6 mm |
| kDetailing value | 2 1/8 in54.0 mm |
| k1Detailing value | 1 1/2 in38.1 mm |
| WWeight | 130 lb/ft193.5 kg/m |
| AArea | 38.3 in²24,710 mm² |
| IxMoment of inertia, strong axis | 6,710 in⁴279,291.3 cm⁴ |
| ZxPlastic modulus, strong axis | 467 in³7,652.8 cm³ |
| SxSection modulus, strong axis | 406 in³6,653.1 cm³ |
| rxRadius of gyration, strong axis | 13.2 in335.3 mm |
| IyMoment of inertia, weak axis | 218 in⁴9,073.8 cm⁴ |
| ZyPlastic modulus, weak axis | 59.5 in³975 cm³ |
| SySection modulus, weak axis | 37.9 in³621.1 cm³ |
| ryRadius of gyration, weak axis | 2.39 in60.7 mm |
| JTorsional constant | 7.37 in⁴306.76 cm⁴ |
| bf/2tfFlange slenderness | 6.73 |
| h/twWeb slenderness | 51.7 |
| Metric designation | W840×193 |
Also known as
W840×193
W shapes of about the same weight in other depths
All W Shapes (AISC) sizes
Sources
- AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
- ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)
Values last checked against these sources on November 15, 2026. · How we check data
Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.