W27×146 Beam Dimensions & Properties

W Shapes (AISC) · W27: 27 in nominal depth

W27×146 is an AISC wide-flange shape (W27: 27 in nominal depth). It is 27.4 in (696.0 mm) deep with a 14 in (355.6 mm) flange, a 0.605 in (15.4 mm) web and a 0.975 in (24.8 mm) flange, and weighs 146 lb/ft (217.3 kg/m). Area 43.2 in² (27,871 mm²); strong-axis Ix = 5,660 in⁴ (235,587 cm⁴), Sx = 414 in³ (6,784.2 cm³), Zx = 464 in³ (7,603.6 cm³).

dDepth
696.0 mm27.4 in27.4 in696.0 mm
bfFlange width
355.6 mm14 in14 in355.6 mm
twWeb thickness
15.4 mm0.605 in0.605 in15.4 mm
tfFlange thickness
24.8 mm0.975 in0.975 in24.8 mm

Drawing

355.6 mm14 in696.0 mm27.4 intf 24.8 mmtf 0.975 intw 15.4 mmtw 0.605 ink 44.7 mmk 1.76 in
Drawn to scale · Dimensions in mmDimensions in inches

W27×146 specifications

dDepth27.4 in696.0 mm
bfFlange width14 in355.6 mm
twWeb thickness0.605 in15.4 mm
tfFlange thickness0.975 in24.8 mm
kDesign value1.76 in44.7 mm
kDetailing value2 3/16 in55.6 mm
k1Detailing value1 1/2 in38.1 mm
WWeight146 lb/ft217.3 kg/m
AArea43.2 in²27,871 mm²
IxMoment of inertia, strong axis5,660 in⁴235,587 cm⁴
ZxPlastic modulus, strong axis464 in³7,603.6 cm³
SxSection modulus, strong axis414 in³6,784.2 cm³
rxRadius of gyration, strong axis11.5 in292.1 mm
IyMoment of inertia, weak axis443 in⁴18,439.1 cm⁴
ZyPlastic modulus, weak axis97.7 in³1,601 cm³
SySection modulus, weak axis63.5 in³1,040.6 cm³
ryRadius of gyration, weak axis3.2 in81.3 mm
JTorsional constant11.3 in⁴470.34 cm⁴
bf/2tfFlange slenderness7.16
h/twWeb slenderness39.4
Metric designationW690×217

Also known as

W690×217

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.