W33×169 Beam Dimensions & Properties

W Shapes (AISC) · W33: 33 in nominal depth

W33×169 is an AISC wide-flange shape (W33: 33 in nominal depth). It is 33.8 in (858.5 mm) deep with a 11.5 in (292.1 mm) flange, a 0.67 in (17.0 mm) web and a 1.22 in (31.0 mm) flange, and weighs 169 lb/ft (251.5 kg/m). Area 49.5 in² (31,935 mm²); strong-axis Ix = 9,290 in⁴ (386,679 cm⁴), Sx = 549 in³ (8,996.5 cm³), Zx = 629 in³ (10,307.5 cm³).

dDepth
858.5 mm33.8 in33.8 in858.5 mm
bfFlange width
292.1 mm11.5 in11.5 in292.1 mm
twWeb thickness
17.0 mm0.67 in0.67 in17.0 mm
tfFlange thickness
31.0 mm1.22 in1.22 in31.0 mm

Drawing

292.1 mm11.5 in858.5 mm33.8 intf 31.0 mmtf 1.22 intw 17.0 mmtw 0.67 ink 48.8 mmk 1.92 in
Drawn to scale · Dimensions in mmDimensions in inches

W33×169 specifications

dDepth33.8 in858.5 mm
bfFlange width11.5 in292.1 mm
twWeb thickness0.67 in17.0 mm
tfFlange thickness1.22 in31.0 mm
kDesign value1.92 in48.8 mm
kDetailing value2 7/16 in61.9 mm
k1Detailing value1 9/16 in39.7 mm
WWeight169 lb/ft251.5 kg/m
AArea49.5 in²31,935 mm²
IxMoment of inertia, strong axis9,290 in⁴386,679 cm⁴
ZxPlastic modulus, strong axis629 in³10,307.5 cm³
SxSection modulus, strong axis549 in³8,996.5 cm³
rxRadius of gyration, strong axis13.7 in348.0 mm
IyMoment of inertia, weak axis310 in⁴12,903.2 cm⁴
ZyPlastic modulus, weak axis84.4 in³1,383.1 cm³
SySection modulus, weak axis53.9 in³883.3 cm³
ryRadius of gyration, weak axis2.5 in63.5 mm
JTorsional constant17.7 in⁴736.73 cm⁴
bf/2tfFlange slenderness4.71
h/twWeb slenderness44.7
Metric designationW840×251

Also known as

W840×251

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.