W18×175 Beam Dimensions & Properties

W Shapes (AISC) · W18: 18 in nominal depth

W18×175 is an AISC wide-flange shape (W18: 18 in nominal depth). It is 20 in (508.0 mm) deep with a 11.4 in (289.6 mm) flange, a 0.89 in (22.6 mm) web and a 1.59 in (40.4 mm) flange, and weighs 175 lb/ft (260.4 kg/m). Area 51.4 in² (33,161 mm²); strong-axis Ix = 3,450 in⁴ (143,599.8 cm⁴), Sx = 344 in³ (5,637.2 cm³), Zx = 398 in³ (6,522.1 cm³).

dDepth
508.0 mm20 in20 in508.0 mm
bfFlange width
289.6 mm11.4 in11.4 in289.6 mm
twWeb thickness
22.6 mm0.89 in0.89 in22.6 mm
tfFlange thickness
40.4 mm1.59 in1.59 in40.4 mm

Drawing

289.6 mm11.4 in508.0 mm20 intf 40.4 mmtf 1.59 intw 22.6 mmtw 0.89 ink 50.5 mmk 1.99 in
Drawn to scale · Dimensions in mmDimensions in inches

W18×175 specifications

dDepth20 in508.0 mm
bfFlange width11.4 in289.6 mm
twWeb thickness0.89 in22.6 mm
tfFlange thickness1.59 in40.4 mm
kDesign value1.99 in50.5 mm
kDetailing value2 7/16 in61.9 mm
k1Detailing value1 1/4 in31.8 mm
WWeight175 lb/ft260.4 kg/m
AArea51.4 in²33,161 mm²
IxMoment of inertia, strong axis3,450 in⁴143,599.8 cm⁴
ZxPlastic modulus, strong axis398 in³6,522.1 cm³
SxSection modulus, strong axis344 in³5,637.2 cm³
rxRadius of gyration, strong axis8.2 in208.3 mm
IyMoment of inertia, weak axis391 in⁴16,274.6 cm⁴
ZyPlastic modulus, weak axis106 in³1,737 cm³
SySection modulus, weak axis68.8 in³1,127.4 cm³
ryRadius of gyration, weak axis2.76 in70.1 mm
JTorsional constant33.8 in⁴1,406.86 cm⁴
bf/2tfFlange slenderness3.58
h/twWeb slenderness18
Metric designationW460×260

Also known as

W460×260

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.