W30×173 Beam Dimensions & Properties

W Shapes (AISC) · W30: 30 in nominal depth

W30×173 is an AISC wide-flange shape (W30: 30 in nominal depth). It is 30.4 in (772.2 mm) deep with a 15 in (381.0 mm) flange, a 0.655 in (16.6 mm) web and a 1.07 in (27.2 mm) flange, and weighs 173 lb/ft (257.5 kg/m). Area 50.9 in² (32,839 mm²); strong-axis Ix = 8,230 in⁴ (342,558.5 cm⁴), Sx = 541 in³ (8,865.4 cm³), Zx = 607 in³ (9,946.9 cm³).

dDepth
772.2 mm30.4 in30.4 in772.2 mm
bfFlange width
381.0 mm15 in15 in381.0 mm
twWeb thickness
16.6 mm0.655 in0.655 in16.6 mm
tfFlange thickness
27.2 mm1.07 in1.07 in27.2 mm

Drawing

381.0 mm15 in772.2 mm30.4 intf 27.2 mmtf 1.07 intw 16.6 mmtw 0.655 ink 47.0 mmk 1.85 in
Drawn to scale · Dimensions in mmDimensions in inches

W30×173 specifications

dDepth30.4 in772.2 mm
bfFlange width15 in381.0 mm
twWeb thickness0.655 in16.6 mm
tfFlange thickness1.07 in27.2 mm
kDesign value1.85 in47.0 mm
kDetailing value2 5/16 in58.7 mm
k1Detailing value1 9/16 in39.7 mm
WWeight173 lb/ft257.5 kg/m
AArea50.9 in²32,839 mm²
IxMoment of inertia, strong axis8,230 in⁴342,558.5 cm⁴
ZxPlastic modulus, strong axis607 in³9,946.9 cm³
SxSection modulus, strong axis541 in³8,865.4 cm³
rxRadius of gyration, strong axis12.7 in322.6 mm
IyMoment of inertia, weak axis598 in⁴24,890.6 cm⁴
ZyPlastic modulus, weak axis123 in³2,015.6 cm³
SySection modulus, weak axis79.8 in³1,307.7 cm³
ryRadius of gyration, weak axis3.42 in86.9 mm
JTorsional constant15.6 in⁴649.32 cm⁴
bf/2tfFlange slenderness7.04
h/twWeb slenderness40.8
Metric designationW760×257

Also known as

W760×257

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.