W21×166 Beam Dimensions & Properties

W Shapes (AISC) · W21: 21 in nominal depth

W21×166 is an AISC wide-flange shape (W21: 21 in nominal depth). It is 22.5 in (571.5 mm) deep with a 12.4 in (315.0 mm) flange, a 0.75 in (19.0 mm) web and a 1.36 in (34.5 mm) flange, and weighs 166 lb/ft (247.0 kg/m). Area 48.8 in² (31,484 mm²); strong-axis Ix = 4,280 in⁴ (178,147.1 cm⁴), Sx = 380 in³ (6,227.1 cm³), Zx = 432 in³ (7,079.2 cm³).

dDepth
571.5 mm22.5 in22.5 in571.5 mm
bfFlange width
315.0 mm12.4 in12.4 in315.0 mm
twWeb thickness
19.0 mm0.75 in0.75 in19.0 mm
tfFlange thickness
34.5 mm1.36 in1.36 in34.5 mm

Drawing

315.0 mm12.4 in571.5 mm22.5 intf 34.5 mmtf 1.36 intw 19.0 mmtw 0.75 ink 47.2 mmk 1.86 in
Drawn to scale · Dimensions in mmDimensions in inches

W21×166 specifications

dDepth22.5 in571.5 mm
bfFlange width12.4 in315.0 mm
twWeb thickness0.75 in19.0 mm
tfFlange thickness1.36 in34.5 mm
kDesign value1.86 in47.2 mm
kDetailing value2 5/8 in66.7 mm
k1Detailing value1 9/16 in39.7 mm
WWeight166 lb/ft247.0 kg/m
AArea48.8 in²31,484 mm²
IxMoment of inertia, strong axis4,280 in⁴178,147.1 cm⁴
ZxPlastic modulus, strong axis432 in³7,079.2 cm³
SxSection modulus, strong axis380 in³6,227.1 cm³
rxRadius of gyration, strong axis9.36 in237.7 mm
IyMoment of inertia, weak axis435 in⁴18,106.1 cm⁴
ZyPlastic modulus, weak axis108 in³1,769.8 cm³
SySection modulus, weak axis70 in³1,147.1 cm³
ryRadius of gyration, weak axis2.99 in75.9 mm
JTorsional constant23.6 in⁴982.31 cm⁴
bf/2tfFlange slenderness4.57
h/twWeb slenderness25
Metric designationW530×248

Also known as

W530×248

W shapes of about the same weight in other depths

All W Shapes (AISC) sizes

Compare all 289 shapes in the W Shapes (AISC) chart →

Sources

  1. AISC Shapes Database v16.0 (2023): dimensions and properties of the 16th Edition Steel Construction Manual
  2. ASTM A6/A6M: General requirements for rolled structural steel bars, plates, shapes and sheet piling (dimensions and tolerances)

Values last checked against these sources on November 15, 2026. · How we check data

Reference values for planning and identification. Confirm critical dimensions with the manufacturer's drawing or the current edition of the standard before production.